USING EXTERNAL COMPONENTS
Connecting the Video Signal Cables
Clamp filter | IEEE1394 switch |
|
| HDV | VIDEO/Y |
| IEEE 1394 |
|
| DV |
|
|
| PB |
Wind once | OUTPUT | PR |
| ||
| LINE |
|
| DC INPUT | IEEE1394 |
Composite cable | IEEE 1394 | VIDEO/Y |
| ||
| HDV |
|
| DV |
|
|
| PB |
| OUTPUT | PR |
| LINE |
|
| DC INPUT | IEEE1394 |
Component cable |
|
|
C H A N G E 1 3 9 4 S W I T C H
Connecting the IEEE1394 Cable
To reduce the emission of unwanted radio waves, be sure to attach the provided clamp filter as shown in the figure on the left.
•Attach the clamp filter as close to the camcorder as possi- ble, as shown in the figure.
•Set the IEEE1394 switch on the left panel of the cam- corder.
DV | : DV format |
HDV | : HDV format |
CAUTION
Connect the cables and set the switches with the power on the device OFF.
Composite and Component Connections
The video signals output from the video signal output connec- tors on this camcorder (VIDEO/Y, PB, PR) are as described below, depending on the settings for the OUTPUT TERMI- NAL item on the VIDEO FORMAT menu screen.
AUTO | : Automatically switches to a composite or | ||||
|
| component signal, depending on which | |||
|
| cable is connected to the video signal | |||
|
| output terminal and outputs the signal. | |||
COMPOSITE | : Outputs a composite signal regardless of | ||||
|
| which cable is connected to the video sig- | |||
|
| nal output connector. |
| ||
COMPONENT | : Outputs a component signal regardless | ||||
|
| of which cable is connected to the video | |||
|
| signal output connector. |
| ||
Output signal when AUTO is set |
|
| |||
|
|
|
| ||
Connector (G: Unconnected F: Connected) | Output | ||||
|
|
|
| Signal | |
VIDEO/Y |
| PB |
| PR | |
F |
| F |
| F | COMPONENT |
|
|
|
|
|
|
F |
| G |
| F | COMPOSITE |
|
|
|
|
|
|
F |
| F |
| G | COMPONENT |
|
|
|
|
|
|
F |
| G |
| G | COMPOSITE |
|
|
|
|
| |
| None of the above |
| OFF | ||
In addition, you can use the PB TAPE item to set whether to automatically detect the video format of the playback tape or only play back a particular format when playing back a tape.
X See page 63.
CAUTION
Be careful not to apply excess force to the video signal out- put terminal when connecting or disconnecting the cable. This will cause poor contact or failure.
Displaying Alarms
• CHANGE 1394 SWITCH
Displayed when the setting for the input/output video format from the IEEE1394 connector and the setting for the IEEE1394 switch are different.
Set the IEEE1394 switch so it matches the video format.
54
