Camera Operation Menu Screen, 3200K, Off | JVC GY-HD100, GY- HD101

MENU SCREENS

CAMERA OPERATION Menu Screen

The CAMERA OPERATION menu screen is only displayed in the Camera mode.

Item			Function/Setting (bold characters indicate initial settings)
AE LEVEL		For adjusting the image level when using auto iris, “ALC” or “EEI”.
		Increase value:	Increases level.
		Decrease value: Decreases level.
		[Settings: –3, –2, - NORMAL (0) - 2, 3]
ALC MAX	Sets the maximum “ALC” value to automatically change the signal intensity level depending on the brightness.
		[Setting: 6dB, 12dB, 18dB]
PRESET TEMP.		Sets the basic color temperature when the [WHT.BAL] white balance selector switch c on page 15 is in the PRST
		(PRESET) position.
		3200K	: Sets the basic color temperature to 3200K. (Use for light sources with a low color temperature,
			such as halogen lamps.)
		5600K	: Sets the basic color temperature to 5600K. (Use for light sources with a high color temperature,
			such as sunlight.)
		MEMO
		This item does not function when the FAW item on the SWITCH MODE menu screen is set to “PRESET”.

SMOOTH TRANS		Smoothens the transition when the [GAIN] switch b on page 15, or
		[WHT.BAL] switch c on page 15 is switched over and achieves gradual change in place of sudden change.
		However, the smooth transition function does not function when switching the [GAIN] switch set in ALC, FULL AUTO
		ON.
		OFF	: Deactivates the smooth transition function.
		ON	: Activates the smooth transition function.

BARS	Sets whether or not color bars are output. (This is fixed at “OFF” when in FULL AUTO mode)
		OFF	: Color bars are not output.
		ON	: Color bars are output.
PAGE BACK		The TOP MENU returns when the SHUTTER dial is pressed with the cursor at this position.

64

Image 68

JVC GY-HD100, GY- HD101 manual Camera Operation Menu Screen, 3200K, Off

Contents

GY-HD101 For Customer UsePage Important Safety Instructions For USA and Canada Remarque Port Cable Length Accessories LensMicrophone Main Features Contents Contents Precautions for Proper Use Introduction Precautions for Use of Head Cleaning Tape Head CleaningPeriodical Maintenance Routine and Periodical Mainte- nance „ For recording and storing videotapes Best condition Battery Pack to be UsedVideocassette to be Used Characteristic CCD Phenomena Condensation Th16 x 5.5BRMU CONTROLS, Indicators and ConnectorsZoom Lens Optional Front Section Rear Section 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch 3TC Display TC/UB display switch5CAM/VTR Camera/VTR mode switch button LCD Door Right Side Section BGAIN Sensitivity selector switch CWHT.BAL White balance switchDStand HHDV/DV LED Left Side Section Top Section GVTR VTR indicator Top Section Cont’dFDISPLAY Display button KPLAY/STILL Play/still button Indications on the LCD Monitor and in the Viewfinder „ Status Screens Indications on the LCD Monitor and in the Viewfinder Cont’d „ Status Screens in the Camera ModeSetting Status Contents of Indications Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Auto White Balance Indication Camera mode only „ Menu Setting Screen„ Alarm Message Display „ Safety Zone Indication Camera mode only LCD Closed Normal LCD Preparations Basic System How to Attach the Viewfinder Attaching the Zoom Lens ProvidedAttaching the Microphone Provided Knob Inserting an SD Memory Card About the Viewfinder Cable„ Inserting an SD Memory Card „ Taking out the SD memory card AC Operation „ Charging the Built-in Battery„ How to charge Battery Operation „ Charging the Battery Pack„ Attaching the Battery Pack on the GY HD100 „ Detaching the Battery Pack from the GY HD100 „ Remaining Battery Power Display „ Battery Recharge Times„ Operating Time with Battery Pack „ Precautions for the Battery Pack Turning the Power on „ Turning the Power on„ Turning the Power OFF Preparations for Operation Loading/Unloading the Cassette „ Cassette Loading„ Unloading the Cassette Mode Setting and Displaying the Date and Time „ Setting the Date and Time Style „ Setting the Date and Time „ Displaying the Time and Date on the Screen „ Setting Displaying Time Code Presetting and Recording of Time Code Drop frame/Non-drop frame modeDrop NON Presetting and Recording of Time Code Cont’d „ Presetting time cord data„ Presetting user’s bit data „ Zero-resetting the Time Code or User’s Bit Data Screen Adjustment Viewfinder Adjustment Back Focus Adjustment White Balance Adjustment „ White Balance Adjustment„ Adjustment procedure „ Error messages Setting the Video Format „ Setting the Frame Rate Item„ Setting the REC Item „ About the Motion Smooth Function ND Filter Camera SettingsScreen Size 43/169 Mode Selection Audio Input Signal Selection „ Selecting the audio signal input„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con Nector „ Monitoring Audio during Recording LOW/MIDDLE/HIGH „ About the Focus Assist Function Shooting OperationBasic Recording Operation „ If the Record-Standby Mode Continues Shooting Operation Function/Initial Setting Header REC Function „ How to set the Header REC menu screen Playback Mode Playback ProcedureFast-Forward, Rewind Search Outputting Audio MIXStereo Monitor PB Audio CH DV Using External Components Connecting the Video Signal Cables„ Connecting the IEEE1394 Cable „ Displaying Alarms Dubbing with AV Devices HDV/DV Dubbing OFF Backup Recording „ Settings„ Connections „ Operation Menu Screen Configuration Menu Screens Setting Menu Screens TOP Menu Screen Video Format Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Connector G Unconnected Connected Output Signal Initial settings U model 7.5% E model 0.0%Native Auto OFF Camera Operation Menu Screen3200K Camera Process 1/2 Menu Screen MiddleHigh Normal Camera Process 2/2 Menu Screen 108% Advanced Process Menu Screen Standard Stop Color Matrix Adjust Menu ScreenSkin Color Adjust Menu Screen Switch Mode Menu Screen REC Item Setting for Step Setting for VariableStep None AUDIO/MIC Menu Screen MIX Blue LCD/VF 1/3 Menu Screen70-80% TC/UB LCD/VF 2/3 Menu ScreenTape Remain VF Contrast LCD/VF 3/3 Menu ScreenLCD Contrast Drop TC/UB/CLOCK Menu ScreenExecute Disable Header REC Menu Screen TIME/DATE Menu Screen BARS+CAMDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YY Blink Others 1/2 Menu Screen3MIN Others 2/2 Menu Screen „ Displaying the File Manage menu Screen „ Loading a menu settings fileFile Manage Menu Screen File Manage Menu Screen Cont’d „ Saving settings„ Error displays „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory Card „ Setting the skin detail function color and range Features of the Camera SectionHow to Use Skin Detail Features of the Camera Section „ Using the Skin Detail Function Outputting color bars Others Display Status Action Error Code Error Details GY-HD100 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder Screen Troubleshooting Symptoms Remedy How to Display the Hour Meter Information for Users on Disposal of Old EquipmentEuropean Union Business users Other Countries outside the European Union Specifications Accessories