„ Monitoring Audio during Recording | JVC GY- HD101, GY-HD100

SETTING AND ADJUSTMENTS BEFORE SHOOTING

PHONES jack

CAUTION

•When the AUDIO INPUT switch is set to MIC, be sure to check that the microphone is connected to the INPUT1/2 connector. If the microphone is not connected, increasing the audio level could cause noise from the input connec- tor to be recorded on the tape. When the microphone is not connected to the INPUT1/2 connector, set the AUDIO INPUT switch to “LINE” or turn down the audio level con- trol.

•In the FULL AUTO mode, the audio level volume cannot be adjusted with the audio level controls on the CH-1 and CH-2.

MEMO

The reference level for audio recorded on the tape can be set with the AUDIO REF. LEVEL item on the AUDIO/MIC menu screen. (–20 dB or –12 dB) The level will change for both CH-1 and CH-2.

Monitoring Audio during Recording

The audio input during recording, in record-pause or stop mode can be monitored through the monitoring speaker or earphone.

•Select the audio channel to be monitored using the MONI- TOR SELECT switch.

CH-1 : The sound input to the CH-1 channel is output.

BOTH : The sound input to the CH-1 and CH-2 channels is output mixed.

CH-2 : The sound input to the CH-2 channel is output.

•The MONITOR volume control adjusts the monitoring vol- ume.

•The loudspeaker or earphone outputs an alarm tone in the case of an abnormal condition occurring in the unit.

An alarm tone is also output when the tape end is reached or when the battery is running down.

*Do not increase the audio monitoring volume exces- sively; otherwise howling with the camera microphone may occur.

MEMO

•When connecting a stereotype earphone, make the fol- lowing settings to output stereo sound.

1Set the MONITOR SELECT switch to BOTH.

2Set the AUDIO MONITOR item on the AUDIO/MIC menu screen to STEREO.

•When AUDIO MONITOR item on the AUDIO/MIC menu screen is set to “STEREO”, only the audio of CH-1 is out- put from the monitoring speaker.

•The volume of the alarm tone is set with the ALARM VR LEVEL item on the OTHERS [1/2] menu screen. (OFF/

LOW/MIDDLE/HIGH)

47

Image 51

JVC GY- HD101, GY-HD100 manual „ Monitoring Audio during Recording, Low/Middle/High

Contents

For Customer Use GY-HD101Page Important Safety Instructions Remarque For USA and Canada Port Cable Length LensMicrophone Accessories Main Features Contents Contents Introduction Precautions for Proper Use Routine and Periodical Mainte- nance Precautions for Use of Head Cleaning TapeHead Cleaning Periodical Maintenance Battery Pack to be Used Videocassette to be Used„ For recording and storing videotapes Best condition Condensation Characteristic CCD Phenomena CONTROLS, Indicators and Connectors Zoom Lens OptionalTh16 x 5.5BRMU Front Section Rear Section LCD Door 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch3TC Display TC/UB display switch 5CAM/VTR Camera/VTR mode switch button Right Side Section HHDV/DV LED BGAIN Sensitivity selector switchCWHT.BAL White balance switch DStand Left Side Section Top Section KPLAY/STILL Play/still button GVTR VTR indicatorTop Section Cont’d FDISPLAY Display button „ Status Screens Indications on the LCD Monitor and in the Viewfinder „ Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Safety Zone Indication Camera mode only „ Auto White Balance Indication Camera mode only„ Menu Setting Screen „ Alarm Message Display LCD Closed Normal LCD Basic System Preparations Knob How to Attach the ViewfinderAttaching the Zoom Lens Provided Attaching the Microphone Provided „ Taking out the SD memory card Inserting an SD Memory CardAbout the Viewfinder Cable „ Inserting an SD Memory Card „ Charging the Built-in Battery „ How to chargeAC Operation „ Detaching the Battery Pack from the GY HD100 Battery Operation„ Charging the Battery Pack „ Attaching the Battery Pack on the GY HD100 „ Precautions for the Battery Pack „ Remaining Battery Power Display„ Battery Recharge Times „ Operating Time with Battery Pack Preparations for Operation Turning the Power on„ Turning the Power on „ Turning the Power OFF Mode Loading/Unloading the Cassette„ Cassette Loading „ Unloading the Cassette „ Setting the Date and Time Style Setting and Displaying the Date and Time „ Displaying the Time and Date on the Screen „ Setting the Date and Time Displaying Time Code „ Setting NON Presetting and Recording of Time CodeDrop frame/Non-drop frame mode Drop „ Zero-resetting the Time Code or User’s Bit Data Presetting and Recording of Time Code Cont’d„ Presetting time cord data „ Presetting user’s bit data Viewfinder Adjustment Screen Adjustment Back Focus Adjustment „ Error messages White Balance Adjustment„ White Balance Adjustment „ Adjustment procedure „ About the Motion Smooth Function Setting the Video Format„ Setting the Frame Rate Item „ Setting the REC Item Camera Settings Screen Size 43/169 Mode SelectionND Filter „ Selecting the CH-2 channel input con Nector Audio Input Signal Selection„ Selecting the audio signal input „ Adjusting Audio during Recording LOW/MIDDLE/HIGH „ Monitoring Audio during Recording Shooting Operation Basic Recording Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode Continues Header REC Function Function/Initial Setting „ How to set the Header REC menu screen Search Playback ModePlayback Procedure Fast-Forward, Rewind Monitor PB Audio CH DV Outputting AudioMIX Stereo „ Displaying Alarms Using External ComponentsConnecting the Video Signal Cables „ Connecting the IEEE1394 Cable Dubbing with AV Devices HDV/DV Dubbing OFF „ Operation Backup Recording„ Settings „ Connections Menu Screens Menu Screen Configuration Setting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo Format Menu Screen Auto Connector G Unconnected Connected Output SignalInitial settings U model 7.5% E model 0.0% Native Camera Operation Menu Screen 3200KOFF Normal Camera Process 1/2 Menu ScreenMiddle High 108% Camera Process 2/2 Menu Screen Standard Advanced Process Menu Screen Color Matrix Adjust Menu Screen Skin Color Adjust Menu ScreenStop None Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable Step MIX AUDIO/MIC Menu Screen LCD/VF 1/3 Menu Screen 70-80%Blue LCD/VF 2/3 Menu Screen Tape RemainTC/UB LCD/VF 3/3 Menu Screen LCD ContrastVF Contrast TC/UB/CLOCK Menu Screen ExecuteDrop Header REC Menu Screen Disable Variation Range U model MM/DD/YY E model DD/MM/YY TIME/DATE Menu ScreenBARS+CAM DATE+TIME Others 1/2 Menu Screen 3MINBlink Others 2/2 Menu Screen „ Loading a menu settings file File Manage Menu Screen„ Displaying the File Manage menu Screen „ Saving settings „ Error displaysFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settings Features of the Camera Section How to Use Skin Detail„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera Section Outputting color bars Display Status Action Others Error Code Error Details GY-HD100 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/Tape Symptoms Remedy Troubleshooting Business users Other Countries outside the European Union How to Display the Hour MeterInformation for Users on Disposal of Old Equipment European Union Specifications Accessories