JVC GY-HD100, GY- HD101 manual Left Side Section

CONTROLS, INDICATORS AND CONNECTORS

Left Side Section

2 3 4 5 6

7

8

9

1 b a 0

1[DC INPUT] DC connector

Power input for 7.2 V DC accepts the supplied AC adapter. X See “AC Operation” on page 31.

2[LINE OUTPUT] Line output connector (Φ3.5mm) Output connector for audio signals.

•Outputs the input audio signal in the Camera mode.

•Outputs the playback audio signal in the VTR mode.

•When a HDV/DV signal (IEEE1394) is input, the EE sound of the input audio signal is output in the VTR mode. (GY-HD100U/GY-HD101E only)

MEMO

Alarm sound is not output.

3[IEEE1394] IEEE1394 switch

Input/output signal and playback signal video from the IEEE1394 connector 4. Set this switch according to the format.

HDV	: For HDV format
DV	: DV format

4[IEEE1394] IEEE1394 connector (6-pin)

Using an IEEE1394 cable (optional), a digital video compo- nent with IEEE1394 connector can be connected here. X See “Connecting the IEEE1394 Cable” on page 54. X See “HDV/DV Dubbing” on page 56.

5[VIDEO/Y, PB, PR] Video Signal Output Connectors (RCA)

These are connectors for component or composite video signal output.

The signal switches automatically depending upon the cables connected to these connectors.

•You can select the output signal using the OUTPUT TERMINAL item on the VIDEO FORMAT menu.

You can also select whether or not to add a setup signal in the SET UP item. X See page 63.

•When the OUTPUT CHAR. item on the OTHERS [1/2] menu screen is ON, the menu setting screen is also dis- played in the video from the video signal output connec- tor. X See page 77.

X See “Dubbing with AV Devices” on page 55.

MEMO

Put the covers on the connectors when you are not using them.

6Cassette cover

Sliding the EJECT switch a on page 17 located on the top section opens this cover to allow insertion or removal of the videocassette.

CAUTION

To prevent foreign objects from entering the internal parts of the VTR unit, do not leave the unit with the cover open for extended periods of time.

7Viewfinder connector (6-pin)

Connect the cable from the viewfinder here.

8[CH-2 INPUT] CH-2 audio input connector selector switch

Selects the CH-2 audio input connector.

INPUT1 : Inputs the audio from the INPUT1 connector

0into CH-2.

INPUT2 : Inputs the audio from the INPUT2 connector

0into CH-2.

MEMO

The audio from the INPUT1 connector is also input into CH-1 regardless of the setting.

9[AUDIO INPUT] Audio input signal selector switch This switch is used to select the input sound signal from INPUT1 or INPUT2 connector.

LINE	: Set to this position when connected to audio
	equipment, etc. The reference input level is
	+4 dBs.
MIC	: Set to this position when the dynamic micro-
	phone is connected.
MIC+48V	: Set to this position when a microphone requir-
	ing +48 V power supply (phantom micro-
	phone, etc.) is connected.

CAUTION

When connecting a component that does not require +48 V power supply, make sure that the switch is not set to MIC+48V before the component is connected.

MEMO

You can select the normal input level for MIC and MIC+48V in the INPUT1, 2 MIC REF. item on the AUDIO/MIC menu screen.

X See page 70.

0[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec- tors

These are audio input connectors for connecting to an external audio device or microphone.

•Set the [AUDIO INPUT] switch 9 according to the device to be connected.

•Set the CH-2 audio input connector using the [CH-2 INPUT] switch 8.

The CH-2 audio from the set connector is recorded.

aShoulder pad slide button

Button to adjust the position of the shoulder pad.

When you press this button, you can move the position of the shoulder pad b forward or backward.

bShoulder pad

16