JVC GY- HD101 manual Outputting Audio, Mix, Stereo, Monitor PB Audio CH DV, Select Audio Monitor

PLAYBACK MODE

Outputting Audio

„ Setting

MONITOR	VTR indicator
SELECT
switch
SHUTTER
dial

STATUS button

CAM/VTR button

AUDIO menu screen

Confirm that the GY-HD100 is in the VTR mode. (VTR indicator: On)

1.Display the AUDIO menu screen.

Select the AUDIO item on the TOP MENU screen.

2.Set the AUDIO menu screen.

• AUDIO MONITOR Items

MIX	: Outputs mixed audio
STEREO	: Outputs stereo audio
• PB AUDIO CH [DV] Items
CH1/2	: To reproduce the sound (CH-1, CH-2)
	recorded during shooting.
MIX	: To reproduce the sound recorded during
	shooting (CH-1, CH-2) and the after-
	recorded sound (on CH-3 and CH-4)
	simultaneously.
CH3/4	: To reproduce the sound after-recorded
	on CH-3 and CH-4.

3.Set the MONITOR SELECT switch.

Refer to Table 1 below to make the setting.

4.Either of the following operations returns you to the nor- mal screen.

•Press the STATUS button or

•Return to the TOP MENU screen, select the EXIT item and press the SHUTTER dial.

MEMO

The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-HD100 records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input. (GY-HD100U/GY-HD101E only))

When the GY-HD100 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-4 channels, the PB AUDIO CH [DV] item on the AUDIO menu screen must be set.

After-recording on the CH-3 and CH-4 channels is not possi- ble.

Table 1		* In HDV format, you can only select the settings within the bold frame.
MONITOR	PB AUDIO CH [DV]	CH1/2	MIX	CH3/4
SELECT	AUDIO MONITOR
CH-1	-	L/R:CH1	L/R:CH1+CH3	L/R:CH3
BOTH	MIX	L/R:CH1+CH2	L/R:CH1+CH2+CH3+CH4	L/R:CH3+CH4
	STEREO	L:CH1 R:CH2	L:CH1+CH3 R:CH2+CH4	L:CH3 R:CH4
CH-2	-	L/R:CH2	L/R:CH2+CH4	L/R:CH4

53