USING EXTERNAL COMPONENTS

HDV/DV Dubbing

1.

IEEE1394 switch

HDV

VIDEO/Y

 

IEEE 1394

 

 

DV

 

 

 

PB

 

OUTPUT

PR

 

LINE

IEEE1394

 

INPUTDC

Recording unit

 

 

 

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

Signal flow

 

 

 

 

 

IEEE1394 cable

CAUTION

Set the IEEE1394 switch on both devices to either HDV or DV.

Start recording after making sure that both devices are properly connected.

5.

VIDEO FORMAT menu screen

Connecting the GY-HD100 to another video component equipped with HDV/DV connector (IEEE1394 standard) using a IEEE1394 cable (optional) enables dubbing of digital sig- nals with high picture quality and high-quality sound.

„Using the GY-HD100 as the playback unit (Dubbing to another video)

1.Set the IEEE1394 switch on the left panel of the cam- corder.

DV

: When dubbing in DV format

HDV

: When dubbing in HDV format

2.Connect the IEEE1394 cable.

3.Turn both devices on.

4.Set the camcorder to VTR mode.

Press the CAM/VTR button. The VTR indicator lights.

5.Set the PB TAPE item on the VIDEO FORMAT menu screen.

X See page 63.

Select whether to automatically detect the playback tape video format or play back only a particular format. Normally, use the “AUTO” setting.

6.Insert a videocassette tape.

This camcorder

: Recorded videocassette tape

Recording unit

: Videocassette you want to dub

7.Press the PLAY/STILL button on this camcorder to start playback.

8.Start recording on the recording device.

See the recording device user manual for more informa- tion.

9.When dubbing is finished, stop recording on the recording device, press the STOP button on the camcorder, and stop the playback.

MEMO

Switch the IEEE1394 switch when the camcorder is OFF.

When you dub still images, they are low resolution images. Noise may also enter the audio.

Operations may differ depending on the features and specifications of the connected device, and operations or data exchange may not be possible even if the devices are connected.

If noise appears on the screen or the audio cuts out, re- connect the IEEE1394 cable or turn the GY-HD100 on again.

If you turn the power to the device connected to the IEEE1394 connector on and off or switch the video input, noise may occur in the audio. If you perform this type of operation, set the speaker volume as low as possible on the audio device connected to the camcorder.

Recording may not be possible in some cases even if the recorder is equipped with a IEEE1394 connector.

56

Page 60
Image 60
JVC GY-HD100, GY- HD101 manual HDV/DV Dubbing