Recording
Recording Automatically by Sensing Move- ments (AUTO REC)
This function enables the unit to record automatically by sensing the changes in subject's movement (brightness) within the red frame dis- played on the LCD monitor. (AUTO REC)
It can be set for both video and still image modes.
1Select video or still image mode.
2Compose the picture according to the subject.
● Adjust the angle of view with the zoom, etc.
3Touch D to display the menu.
4Select “AUTO REC” and touch C.
5Select “ON” and touch C.
6Recording starts automatically when the subject within the red frame moves.
●A red frame appears 2 seconds after the menu display disappears.
●For video recording, recording continues while there are still move- ments of the subject (changes in brightness) within the red frame. When there are no more movements of the subject (changes in bright- ness) within the red frame, recording will stop in 5 seconds.
●To stop video recording manually, press the START/STOP button. However, as the AUTO REC setting remains at ON even after the vid- eo recording is stopped, recording starts again when movements of the subject (changes in brightness) are detected within the red frame. To cancel AUTO REC, set it to “OFF”.
CAUTION:
●The only manual recording setting available is “TELE MACRO”.
The rest are all set to “AUTO”.
●Digital zoom, image stabilizer,
●AUTO REC cannot be used together with
●The auto power off and
Memo:
●Recording stops when there are no changes for 5 seconds during vid- eo recording.
●Recording may not start when the movements of the subject within the red frame are too fast or the changes in brightness are too small.
●Recording may not start when the change in brightness is too small.
●Recording may start due to changes in brightness even if there is no movement of the subject within the red frame.
●The performance of AUTO REC is affected by its sensitivity to the sur- rounding brightness. The function may not work with certain environ- ments.
●While zooming, recording cannot be started.
33
