Filename
|
EN 3
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the
ATTENTION:
Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product and keep this booklet for future reference.
INSTALLATION
1. | Grounding or Polarization |
| (A) Your product may be equipped with a polarized |
| |
| blade wider than the other). This plug will fit into |
| the power outlet only one way. This is a safety |
| feature. |
| If you are unable to insert the plug fully into the |
| outlet, try reversing the plug. If the plug should |
| still fail to fit, contact your electrician to replace |
| your obsolete outlet. Do not defeat the safety |
| purpose of the polarized plug. |
| (B) Your product may be equipped with a |
| |
| (grounding) pin. This plug will only fit into a |
| |
| feature. |
| If you are unable to insert the plug into the outlet, |
| contact your electrician to replace your obsolete |
| outlet. Do not defeat the safety purpose of the |
| |
2. | Power Sources |
| Operate your product only from the type of power |
| source indicated on the marking label. If you are not |
| sure of the type of power supply to your home, |
| consult your product dealer or local power company. |
| If your product is intended to operate from battery |
| power, or other sources, refer to the operating |
| instructions. |
3. | Overloading |
| Do not overload wall outlets, extension cords, or |
| integral convenience receptacles as this can result in |
| a risk of fire or electric shock. |
4. | Power Cord Protection |
| Power supply cords should be routed so that they are |
5.Ventilation
Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.
•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
•Do not place the product in a
6.Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
ANTENNA INSTALLATION INSTRUCTIONS
1.Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and
2.Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and
3.Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN WIRE
GROUND CLAMP
not likely to be walked on or pinched by items placed |
upon or against them, paying particular attention to |
cords at plugs, convenience receptacles, and the |
ELECTRIC SERVICE EQUIPMENT
ANTENNA DISCHARGE UNIT (NEC SECTION
point where they exit from the product. |
GROUNDING
CONDUCTORS
(NEC SECTION
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)
NEC - NATIONAL ELECTRICAL CODE
