JVC HM-DH5U Digital Set Top Box Connection, Connect VCR to Digital Set Top Box, Hdmi Connection

Models: HM-DH5U

1 92
Download 92 pages 2.43 Kb
Page 15
Image 15

Filename [HM-DH5U_Eng.fm]

HM-DH5U_Eng.fm Page 15 Tuesday, June 1, 2004 4:12 PM

Masterpage:Right-FullCol

 

EN 15

Digital Set Top Box Connection

If you are using a HD Ready TV, you can make use of this connection to connect to the VCR.

First, check the contents and situate the VCR as instructed in steps A and B on page 13. Then go to the following steps.

C Connect VCR to Digital Set Top

Box

AConnect an i.LINK cable between the VCR’s [i.LINK IN/OUT] connector and Digital Set Top Box’s i.LINK input/output connector.

BConnect an audio/S-Video cable between the VCR’s [AUDIO/S VIDEO INPUT] connectors and the Digital Set Top Box’s audio/S-Video output connectors.

D Connect VCR to TV

A HDMI Connection

AConnect both the RF cable and the AV cables to the TV as explained in step C A ~ C of ‘Basic Connection’ (A page 13).

BConnect a HDMI cable between the VCR’s [HDMI OUT] connector and the TV’s HDMI input connector.

If your TV has only DVI input, use a HDMI to DVI conversion cable to connect to the VCR’s [HDMI OUT] connector. Also, connect an audio cable between the VCR’s [AUDIO OUTPUT] connectors and the TV’s audio input connectors. If your TV is connected to an AV amplifier, you can make use of the VCR’s [OPTICAL] connector to connect to the amplifier (A page 64).

OR

If your TV does not have a HDMI or DVI connector, you can make a ‘Component Video Connection’ as stated in B below, or ‘VIDEO/S- VIDEO Connection’ as on page 13.

B Component Video Connection

AConnect both the RF cable and the AV cables to the TV as explained in step C A ~ C of ‘Basic Connection’ (A page 13).

BConnect a component video cable between the VCR’s [COMPONENT VIDEO OUT] con- nectors and the TV’s component video input connectors.

CConnect an audio cable between the VCR’s [AUDIO OUTPUT] connectors and the TV’s audio input connectors.

E Connect Digital Set Top Box to TV

AConnect a component video cable between the Digital Set Top Box’s DTV (component) output connectors and the TV’s DTV input connectors.

BConnect an audio cable between the Digital Set Top Box’s audio output connectors and the TV’s audio input connectors.

F Connect VCR to power source

Connect the AC power plug to the AC outlet.

The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC power outlet (A page 16).

(If [AUTO] or channel numbers are displayed on the front display panel before the VCR is turned on, the clock and tuner channels are being set automatically. Wait until the clock time is displayed on the front display panel before turning on the VCR.)

G Final preparation for use

Turn on the VCR.

You can now perform basic playback (A page 28) or basic recording (A page 35).

Page 15
Image 15
JVC HM-DH5U manual Digital Set Top Box Connection, Connect VCR to Digital Set Top Box, Connect Digital Set Top Box to TV