22 EN, Enter DBS Receiver’s brand | JVC HR-S9800U specification

DBS RECEIVER BRAND SET

51

DID YOUR DBS RECEIVER CHANGE TO CHANNEL 100? =YES

NO

PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

DBS RECEIVER BRAND SET

4 0

PRESS NUMBER KEY (0–9)

THEN (OK) TO TEST PRESS (MENU) TO END

22 EN

INITIAL SETTINGS (cont.)

CH 5°

6OK

VCR TV CABLE/DBS

1	2	3
4	5	6	7
7	8	9
	0

%

Þ

67

OK

NOTES:

The Controller may not work with all types of DBS receiver. If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. In addition, if your DBS receiver is equipped with a timer, you can also use “Satellite Auto Recording” ( pg. 61).

The VCR can only change the satellite channel through the Controller during timer recording.

If your DBS receiver cannot be operated with a remote control (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording.

For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722.

6AccessPress OKDBS. Receiver Brand Set screen

7 Enter DBS Receiver’s brand

On the Remote ONLY:

Press the appropriate Number keys to enter the brand code from the following list, then press OK.

The program currently received through the

DBS receiver appears for about 10 seconds.

BRAND	CODE
JVC (DISH Network)	51
ECHOSTAR (DISH Network)	51
PRIMESTAR	50
SONY (DSS)	41
RCA (DSS)	40

If the DBS receiver’s channel changes to the channel listed below for your brand, setting is complete

JVC = 100 ECHOSTAR = 100 PRIMESTAR = 55 SONY = 205 RCA = 205

Press OK and “DBS

RECEIVER CONTROL IS ON” appears on the screen for about 5 seconds, then it returns to the normal screen.

If the DBS receiver’s channel does not change as shown above

1Press %Þ (or CH 5° on the front panel) to move the highlight bar (arrow) to “NO”.

2Press OK.

3Re-enter the correct code.

Image 22

Contents

HR-S9800U Dear Customer Telephone Number Power Lines Power SourcesPower Cord Protection Grounding or Polarization Cleaning AccessoriesDamage Requiring Service Replacement Parts Contents Basic Connections Back of VCR Situate VCR Check contents Final preparation for useConnect VCR to TV What to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Auto Clock Set/Auto Tuner Set Return to normal screen Language SettingSelect language Press Menu Access Clock Set screen Clock SettingAccess Main Menu screen 10 EN Set Auto Clock to on Setting clock semiautomaticallySelect D.S.T. mode Select host channel Set time Setting clock manually12 EN Set year Access Tuner Set screen Tuner SettingSetting channels automatically Perform Auto Channel Set 14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channels What is a ghost? Setting ghost reductionSelect a channel and set ghost reduction Mode Press the NumberCH 45 ADD Installing Controller Cable Box Control Setting16 EN Access Cable Box Set screen Setting cable box output channel & brandAccess Main Menu screen on VCR Turn on cable box Select cable box output channel Access Cable Box Brand Set screen18 EN Enter cable box brand Cable BOX Brand List Brand Code Connect DBS receiver to VCR How to control the DBS receiver20 EN Connect Controller to VCR Turn on DBS receiver Setting DBS receiver output channel & brandAccess DBS Receiver Set screen DBS Receiver SET, then press OK or # 22 EN AccessPress OKDBS. Receiver Brand Set screenEnter DBS Receiver’s brand Load a cassette Basic PlaybackStart playback Changing display information Basic Playback Features24 EN Checking tape position Selecting monitor sound Adjusting tracking conditionPlaying back tape repeatedly Automatic operations after 26 EN Locating beginning of timerAccess distant code Locating beginning Skip Search Adjusting picture conditionSkipping unwanted portions Digital TBC/NR Select recording channel Basic Recording28 EN Set tape speed To stop recording To fast-forward the tape when it is not runningTo pause recording Press Pause 8. To resume recording, press Play 30 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording another Showing on-screen display Adjust recording level Adjusting recording level32 EN Other useful functions for recording Record safety tabAccidental erasure prevention Locating particular scene Special Effect Playback34 EN Rapidly Picture Search High-Speed Picture Search Advance or reverse still picture Viewing still picturePause during playback Variable-Speed Picture Search Slow Motion Playback Pro-Slow 36 ENViewing slow motion picture On the Remote During normal playback Sounds reproduced by the TimeScan function How to use the Shuttle ring on the RemoteTimeScan function Playback tape 38 EN VCR Plus+ Timer ProgramingAccess VCR Plus+ screen Stop + Input receiving channel number Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Set tape speed Press SP/EP 40 EN Changing VCR Plus+ SettingVCR Plus+ guide channel matching Access Guide Channel Set screen Input guide channel number Express Timer Programing 42 EN To timer-record daily Monday-Friday or weekly serials Checking program settings 44 EN Select program to modify Confirm overlapping programsProgram 46 EN Access Title screenNavigation Playback Select program Deactivating Video Navigation Deactivate Video Navigation 48 EN Access Edit Title screenEditing Titles Editing tape title Select tape title How to enter the charactersEditing program title and category Enter title Deleting tape information Cancel50 EN 3 D 2,3 Check memory Deleting program informationChecking memory Delete program information 52 EN Access tape number screenFinding Tapes Finding by tape number Conform tape number lists Finding by categoryFinding by recording date Confirm tape number lists Finding by remaining time Access Find Title screen54 EN 3,5 Current tape Position Unrecorded portion 56 EN Access Function Set screenChange setting Select Function When this function is set to OFF When this function is set to onOFF 58 EN For Example HI-FI AV Compu Link 60 ENVideo Make sure the record safety tab is intact Set timer program on DBS receiverEngage Satellite Auto Recording standby mode Press REC Link Child Lock 62 EN To Jlip ID NO. SET Select Jlip ID Number Set screenSet Jlip ID Number Return to normal screen Connection Edit From Camcorder64 EN Various connection for editing tapes Select video input terminal Select input mode on this VCRMake connections Set Picture Control to Edit 66 EN Select edit modeEdit To Or From Another Load cassettes Start audio dubbing Activate Audio Dubbing modeLocate start point To stop audio dubbing Insert Editing Source tape Edited tape 68 ENAnother VCR for playback AV Dubbing Source tape Edited tape Locate end point Activate editing modePrepare tapes Start editing TV Brand Setting 70 EN Enter cable box brand code Cable Box Brand SettingTurn on the cable box Operate cable box Turn on the DBS receiver DBS Receiver Brand Setting72 EN Enter DBS receiver brand code Plug in VCR Changing Remote Control CodeUnplug VCR Turn on VCR Troubleshooting 74 EN Timer Recording Corrective Action 76 EN About Head CleaningMoisture Condensation Playback Questions and answersTimer Recording Recording 78 EN List of terms Front panel $ % On-screen display 80 ENRear panel Remote PAUSE/AV Compulink terminal How to use the Remote Remote 82 EN TimerAccessories Usable cassettes 781 954 650 New Maple Avenue Pine Brook, NJ Limited Warranty 84 EN Memo 86 EN Page HR-S9800U