66 EN | EDITING (cont.) |
Edit To Or
From Another
VCR
2 Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
3 Select input mode on recording VCR Select the correct external input on the other VCR.
Connection |
|
|
Ex. When using this VCR as the playback VCR |
| |
This VCR (for playback) |
| |
| JLIP |
|
To AUDIO/ | To S VIDEO |
|
VIDEO OUT | OUT |
|
Audio/video |
|
|
cable (supplied) |
| |
|
| |
| (supplied) | 4 |
To Audio/ | To | |
video Input | Input | |
Another VCR (for recording) | 5 | |
|
| |
On this VCR (when using this VCR as the recording VCR);
Select
Select
On the front panel:
Press CH5°.
On the Remote:
Press the Number key “0 (AUX)” or CH
NOTES:
When using this VCR as the recording VCR, set the
video input terminal setting correctly ( | pg. 56 and |
60). |
|
When using this VCR as the playback VCR for | |
editing, set “DIGITAL R3” to “OFF” ( | pg. 58). |
Select edit mode
Set the edit mode to “ON” for the VCRs if such a mode is equipped.
On this VCR, set “PICTURE CONTROL” to “EDIT” by following the procedure described on pages 56 and 57.
Start playback
Press PLAY ( 3 ) on the playback VCR.
NOTE:
If the playback VCR is equipped with a superimpose/ OSD disable feature then set it to “OFF” before starting playback ( pg. 56 and 57).
You can use your VCR as the playback or recording VCR. Refer also to the other VCR’s instruction manual for connection and its operations.
1Make connections
Connect an audio/video cable between the playback VCR’s audio/video output connectors and the recording VCR’s audio/video input connectors.
When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR.
If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
6Start recording
Press REC ( ƒ ) on the recording VCR.
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 56 and 57).
