EN 71
Cable Box Brand Setting
2 |
|
| |
|
|
| |
VCR TV CABLE/DBS |
|
| POWER |
|
| ENTER | |
|
|
| |
1 | 2 | 3 | |
4 | 5 | 6 | |
7 | 8 | 9 | Number |
| 0 |
|
|
3
TV CH +/–
CABLE BOX BRAND NAME | BRAND CODE |
|
|
ARCHER | 01, 05, 17 |
CABLETENNA | 01, 17 |
CABLEVIEW | 15, 16, 17, 21, 25 |
CITIZEN | 15, 16, 17, 21, 25 |
CURTIS | 02 |
DIAMOND | 01, 17 |
EASTERN | 19 |
GC BRAND | 15, 16, 17, 21, 25 |
GEMINI | 15 |
GENERAL INSTRUMENTS | 01, 04, 06, 11, 12, 15, 28 |
HAMLIN | 10, 18, 19, 23 |
JASCO | 15 |
JERROLD | 01, 04, 06, 11, 12, 15, 28 |
NOVAVISION | 02 |
OAK | 07 |
PANASONIC | 13, 14 |
PULSER | 15, 16, 17, 21, 25 |
RCA | 13, 14 |
REGAL | 10, 18, 19, 23 |
REGENCY | 19 |
REMBRANDT | 01, 16, 17 |
SAMSUNG | 05, 16, 24 |
SCIENTIFIC ATLANTA | 02 |
SIGMA | 07 |
SL MARX | 05, 16, 17, 24, 25 |
SPRUCER | 13, 14 |
STARGATE | 05, 15, 16, 17, 21, 24, 25 |
TELEVIEW | 05, 16, 24 |
TOCOM | 01, 04, 16 |
UNIKA | 01, 17 |
UNIVERSAL | 16, 17, 25 |
VIDEOWAY | 03, 09, 22 |
ZENITH | 03, 09, 22 |
This Remote can control some functions of the cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
1 Turn on the cable box
Turn on the cable box using the Power button on the cable box or its Remote.
2 Set remote operation mode
Set the VCR/TV/CABLE/DBS selector to “CABLE/ DBS”.
3Enter cable box brand code
Follow the example shown below.
1Press and hold POWER.
2Press the Number keys to enter your cable box’s brand code by referring to the table below.
3Press STOP ( 7 ), and release POWER.
Once you have set the Remote to operate the cable box, you do not have to set it until you replace the batteries from the Remote.
4 Operate cable box
First set the VCR/TV/CABLE/DBS selector to “CABLE/DBS”, then press one of the following buttons: POWER, TV CH
For some brands, you must press ENTER after having pressed the Number keys to enter a channel number.
To change the cable box’s channels, press TV CH +/– or the Number keys. (The CH +/– button can be used to change the VCR’s channels only.)
To operate the VCR, set the VCR/TV/CABLE/ DBS selector back to “VCR”.
NOTES:
Depending on the type of cable box, some or all functions cannot be operated using this Remote.
It’s not possible to operate a cable box not equipped with a remote sensor.
It’s not possible to set the Remote for both your cable box and a DBS receiver at the same time. You can only set the Remote control to operate one of these units at a time.
(Ex.) To set the Remote to RCA 14:
POWER | 4 |
|
1 | STOP | |
. , ? | DHI |
|
Hold | Press in succession | Release |
down |
