EN 29

To pause recording

Press PAUSE ( 8). To resume recording, press PLAY ( 3).

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

To rewind the tape (when it is not running)

Press REW ( 1 ) (or turn the TIME SCAN SHUTTLE ring on the front panel to the left).

To fast-forward the tape (when it is not running)

Press FF ( ` ) (or turn the TIME SCAN SHUTTLE ring on the front panel to the right).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.

You can also eject the cassette when the VCR is turned off.

To turn off the VCR

Press POWER.

NOTE:

If “MEMORY FULL” appears on the display when you start recording, the VCR’s memory for the Video Navigation function is full. This is not related to actual recording, so you can finish recording normally, but the Video Navigation information such as recording date, start time, end time, and channel number will not be stored in memory.

It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

Page 29
Image 29
JVC HR-S9800U manual To pause recording, To stop recording, To fast-forward the tape when it is not running