JVC HR-S9800U manual Basic Playback Features, 24 EN, Changing display information

24 EN BASIC PLAYBACK AND RECORDING (cont.)

Basic

Playback

Features

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

D – 1– 3 C

STOP/EJECT

( 7 / 0 )

A Changing display information

Press DISPLAY during playback.

Each time you press the button, the front display panel shows the time counter, tape remaining time and the clock time in sequence.

Time Counter Tape Remaining Time

Clock Time

To display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen display” ( pg. 31).

“COUNT” appears on the screen when the time counter is shown. “REMAIN” appears on the screen when the tape remaining time is shown.

When the tape remaining time appears, “” also lights on the front display panel.

The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate.

To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

E

VCR TV CABLE/DBS

F –b

1 2 3 A

B Checking tape position

The tape position indicator

appears on the screen in the

following cases:

When you change the VCR

operation mode from the

4

7

C. RESET

F –a, b, c

5	6
8	9
0	F –C
	D –2
	C F –a
	STOP ( 7 )

stop mode to fast forward or		B	+ + +		E
rewind mode.
When you perform an Index			COUNT	0:33:27
Search (	pg. 26) or Instant
Review (	pg. 26).

The position of “ ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.

NOTES:

“SUPERIMPOSE” must be set to “ON”, or the indicator will not appear ( pg. 56, 57).

It may take a few seconds for the tape position indicator to be displayed.