JVC HR-S9800U manual 44 EN, Checking program settings

44 EN TIMER RECORDING (cont.)

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

VCR TV CABLE/DBS

		A –1
1	2	3
4	5	6
7	8	9
B –2C –3	0	A –1B –4
		B –2C –3
PROG.		A –2, 3
B –2C –3
		B –3

C –2

C –2

C –3

Other Useful functions for timer recording

You can also use the following functions for timer recording.

Auto Timer ( pg. 57)

When “AUTO TIMER” is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

Auto SP = EP Timer ( pg. 58)

If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a broadcast of more than 2 hours in length.

A Checking program settings

1 Disengage timer

Press TIMER, then press POWER.

When “AUTO TIMER” (	pg. 57) is set to “ON”,
you do not have to press TIMER.
2 Access Program Check screen
Press PROG. CHECK.	PR START		STOP	CH	DATE
	1	8:00P	10:00	12	12/24
	2	10:00A	10:45	40	12/25
	3	11:30P	1:00	125	12/25
	4
	5

6

7

8

PRESS (CHECK) TO NEXT

3 Access Program screen

Press PROG. CHECK again to check more detailed information. Each time you press PROG. CHECK, the next program’s Program screen appears. When all Program screens are shown, normal screen resumes.

B Cancelingsettings or changing program

1 Access Program screen Repeat steps 1 to 3 above.

2 Cancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/ EP ( ) when the Program screen on which you want to make changes is shown.

3 Return to normal screen

Press PROG. CHECK as many times as necessary until no Program screen is shown.

4 Reengage timer recording standby mode

Press TIMER.

When “AUTO TIMER” ( pg. 57) is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.