ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band

 

3 1- 2 1- 1

2

 

 

 

1 1

2

 

 

Select the band.

 

1Press SOURCE (ATT) to select FM as the source.

2 Press and hold MODE BAND to select the FM1 band.

2

Tune into a station of 88.3 MHz.

See page 7 to tune into a station.

3

Press and hold the number button (in this example, 1) for more than 2 seconds.

FM band number and “MEMO” appear alternately for a while.

4

Repeat the above procedure to store other stations into other preset numbers.

Notes:

• A previously preset station is erased when a new station is stored in the same preset number.

• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,

10

during battery replacement). If this occurs, preset the stations again.