STOP

PLAY

Presetting the Access Commands

You can store the frequently-used operations into the Access Commands and register your voice to make the System execute the Access Commands.

•You can store the following operations into the Access Commands;

–Selecting CD or External component as the source.

–Selecting the frequencies. (FM and AM)

–Selecting the band and preset number. (DAB)

–Selecting the CDs in the CD changer.

Before you start...

•Set “VOICE DEMO” to “DEMO OFF.”

Without setting it to “DEMO OFF,” you cannot preset the Access Commands.

•Notice the following;

–You can store up to 12 Access Commands (12 operations and voice commands into memory).

–Each voice command must be within 3 second long.

–You can register any word you want; however, if it is too short (ex: “Pops”), the System may not recognize it correctly.

ENGLISH

Registering procedure (for the first Access Command)

EXAMPLE:

Storing an operation of “selecting the FM station of 89.5 MHz,” and registering words “Jazz 89” as your Access Command to that operation into Access Command number 14.

3,7

1- 1, - 4

1- 3

1- 2

4

Voice remote

1

Select the User Word mode by following steps 1 to 4 on page 34.

1Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press¢ or 4 repeatedly until “VOICE DEMO” appears on the display.

3 Press – to select “DEMO OFF.”

4 Press SEL again to finish the setting.

TO BE CONTINUED ON THE NEXT PAGE

37