ENGLISH

STOP

PLAY

Operating the receiver using the voice commands

Basic Procedure

1,2

4

ATT/STR*

* ATT stands for “attenuator,”

and STR stands for “store.”

Voice remote

1

Turn on the power.

The display illuminates and the control panel comes out.

2

Activate the Voice Recognition System.

“SPEAK” starts flashing on the display after the voice navigation “Please speak now” (or a beep).

3

Speak one of the voice commands to the microphone while “SPEAK” is flashing on the display.

The receiver performs what you command it to do. (Ex. when you speak “Jazz 89.”)

If your voice cannot be recognized

The unit will ask you to speak again (and more) until “V.COMMAND” disappears from the display.

If your voice command cannot be carried out and “V.COMMAND” disappears, repeat from step 2.

42