WARNINGS
•DO NOT install any unit in locations where;
–it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
–it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.
–it may obstruct visibility.
•DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident.
•DO NOT register or record the voice commands while driving, as this may result in a traffic accident.
•If you need to operate the receiver while driving, be sure to look ahead carefully or you may be involved in a traffic accident.
CAUTION on Volume Setting
CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
To activate the display demonstration
While holding DISP, press
¢until “DEMO” appears on the lower part of the display.
Various functions and display illumination modes equipped for this unit will be demonstrated repeatedly in sequence. During the display demonstration, “DEMO” flashes on the lower part of the display.
To turn off the display demonstration, press
¢ again for a few seconds again while holding DISP.
• The display demonstration will turn off automatically after 1 hour.
ENGLISH
How to use the number buttons:
After pressing MODE BAND, the number buttons work as different function buttons (while “MODE” remains on the display).
To use these buttons as number buttons after pressing MODE BAND, wait for 5 seconds without pressing any number
button so that “MODE” disappears from the display.
•Pressing MODE BAND again also erases “MODE” from the display.
3