4

STOP

PLAY

Speak the word(s) you want to record while “SPEAK” is flashing on the display. (In this example, speak “Classics.”)

ENGLISH

•If the System recognizes your word(s), “REPEAT” starts flashing on the display after the voice navigation “Please repeat.”

•If the System does not recognize your word(s), it will ask you to speak again. In this case, speak the word(s) again.

5

Speak the same word(s) again while “REPEAT” is flashing on the display. (In this example, speak “Classics.”)

“CHECK” appears on the display while recording your voice,

“OK” appears when recording is complete.

6

Press and hold VOICE again to finish the recording.

7

Repeat the above procedure to store other Access Commands.

41