JVC LVT1627-001A manual Using Bluetooth devices, AV Menu items, Icons for phone types

ENGLISH

Using Bluetooth devices

General

•While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place.

•Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.

•This unit may not work for some Bluetooth devices.

•Connecting condition may vary depending on circumstances around you.

•When the unit is turned off, the device is disconnected.

Icons for phone types

•These icons indicate the phone type set on the device.

:Cellular phone

:Household phone

:Office

:General

:Other than above

Warning messages for Bluetooth operations

•Connection Error : The device is registered but the connection has failed. Use Connect to connect the device again. (☞ [85])

•Error : Try the operation again. If Error appears again, check if the device supports the function you have tried.

•Device Unfound : No available Bluetooth device is detected by Search.

•Loading : The unit is updating the phone book and/or a text message.

•Please Wait... : The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit).

•Reset 08 : Check the connection between the adapter and this unit.

AV Menu items

•If you change the Amplifier Gain setting from High Power to Low Power while the volume level is set higher than 30, the unit automatically changes the volume level to

Volume 30.

•After you change any of Menu Language/

Audio Language/Subtitle settings, turn off then on the power, and re-insert the disc (or insert another disc) so that your setting takes effect.

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

•When you select 16:9 for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if 4:3 Pan Scan is selected, the screen size may become 4:3 Letter Box for some discs.

104