JVC LVT1627-001A Proceed to the next setting, Language Installation Angle Reverse Polarization

ENGLISH

Initial settings

When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make necessary settings.

Turn on the power.

Language	1/2
Dansk
Deutsch
English UK
English US
Español

Adjust the following settings.

Select an item	4 Reverse Polarization
Proceed to the next setting	Engage the parking brake, step on the
	brake pedal, then switch the gear lever.
	If Forward and Reverse alternates
Back to the previous setting	on the display, connection is correct.
	Select one of the alternatives (GND or
1 Language	Battery) that shows the gear position
	correctly.

Select the language you want for the display and the voice guidance.

Finish the procedure.

2 Store Display Mode

Select Off.

• If you select On, the System starts in the navigation demonstration mode for shops. (☞[47])

3Installation Angle

Select which angle your unit is installed at. This setting is necessary for the precise functioning of the Navigation System.

•See “Measuring the installation angle” on the Installation/Connection Manual.

You can also change these settings (except Store Display Mode) through Setup Menu and AV Menu when necessary.

•Language ☞[46]

•Installation Angle ☞[46]

•Reverse Polarization ☞[95]

8