JVC LVT1627-001A manual Language*5, Km / m , mi / yd, Deg / Min / Sec , Deg / Milli / Micro

ENGLISH

Setup Menu (continued)

	Menu items	Selectable settings	(Initial setting)
	Installation	Select the angle of the unit measured by the supplied gauge. (See
	Angle	also the Installation/Connection Manual.)
		1: –5.0° to 1.0°
		2: 1.0° to 6.0°
		3: 6.0° to 14.0°
		4: 14.0° to 32.0°
		• It is not recommended to install the main unit at an angle of
		more than 30˚; otherwise, the malfunction may result.
		• Guidance is canceled when you change this setting.
Setting	WAAS/EGNOS	Off: Cancels.
		Select whether to use WAAS and EGNOS to increase the accuracy
System		of positioning.
		On: Activates.
	Language*5	Select the language used for on-screen information and voice

guidance.

Dansk, Deutsch, English UK, English US, Español,

Français, Italiano, Nederlands, Svenska

Reset Calibration Reset the calibration data in the following cases:

•When you reinstall the unit to another car.

•When you change Installation Angle.(☞above)

•When you replace or rotate the tyres.

Once this is carried out, the calibration data is cleared. Calibration starts when you exit from the menu. (☞[9])

• Guidance is canceled when you reset the calibration data.

Measuring Units	Select the measuring units for distance.
	km / m, mi / yd
Coordinates	Select the measuring units for coordinate degrees.
	Deg / Min / Sec, Deg / Milli / Micro
Car Position	If you find your current position displayed on a wrong place on the
	map, use this setting to correct your position.
	Adjust the position with 4¢5∞, then the direction with 5∞.

*5 This setting is shared with the Language setting in AV Menu (☞[90]).

46