ENGLISH

 

Menu items

 

 

 

 

High Pass Filter

 

Sound

Crossover

 

 

Amplifier Gain

 

 

Screen Control/

Picture [Disc]/

Picture [Video]

Screen Control

 

 

+03

Bright

Exit

Selectable settings

(Initial setting)

Through: Select when the subwoofer is not connected.

On: Select when the subwoofer is connected.

Adjust the crossover frequency between the front/rear speakers and the subwoofer.

55 Hz, 85 Hz, 125 Hz

You can change the maximum volume level of this receiver.

Amplifier Off: Deactivates the built-in amplifier.

Low Power: Volume 00 to 30 (Select this if the maximum power of the speakers is less than 50 W)

High Power: Volume 00 to 50

You can adjust the monitor to make it clear and legible.

While picture from VIDEO IN is displayed, you can adjust the playback picture of VIDEO IN (Picture [Video]).

While DISC is selected as the source and playback picture is displayed, you can adjust the playback picture of DISC (Picture [Disc]).

For other screens than above, Screen Control appears.*15

Bright*16: Adjust if the picture is too bright or too dark. –15to +15 (00)

Color Temp.: Adjust the colour temperature of the picture—warmer or cooler. –15to +15 (00)

Contrast: Adjust the contrast. –15to +15 (00)

Tint: Adjust the tint if the human skin colour is unnatural. –15to +15 (00)

Tint is adjustable only for VIDEO IN signal in NTSC and discs in NTSC.

*15 The settings of Screen Control are also applied to the map screen and screens of Navigation Menus. *16 This setting in Screen Control is shared with Brightness setting in Setup Menu ([44]).

96

Page 222
Image 222
JVC LVT1627-001A manual English