Menu items

Selectable settings

(Initial setting)

Flat, Hard Rock, R&B, Pop, Jazz, Dance Music,

EQCountry, Reggae, Classic, User 1, User 2, User 3 [98]

Fader/Balance

 

Fader/Balance

 

 

F02

L02

Exit

Adjust fader—speaker output balance between the front and rear speakers. (00)

F06: front only

R06: rear only

• When using a two-speaker system, set the fader to the center (00).

Adjust balance—speaker output balance between the left and right speakers. (00)

L06: left only

R06: right only

Sound

Volume Adjust

Adjust and store auto-adjustment volume level for each

 

source, comparing to the FM volume level. The volume

 

level will automatically increase or decrease when you

 

change the source.

 

–12 to +12 (00)

Subwoofer

Adjust the settings below in the submenu:

 

Phase: Subwoofer phase. Select either Normal or

 

Reverse, which reproduces a better sound.

 

Level: Subwoofer output level. 00 to 08 (04)

High Pass Filter

Through: Select when the subwoofer is not connected.

 

On: Select when the subwoofer is connected.

Crossover

Adjust the crossover frequency between the front/rear

 

speakers and the subwoofer.

 

55 Hz, 85 Hz, 125 Hz

Amplifier Gain

You can change the maximum volume level of this

 

receiver.

 

Amplifier Off: Deactivates the built-in amplifier.

 

Low Power: Volume 00 to 30 (Select this if the maximum

 

power of the speakers is less than 50 W)

 

High Power: Volume 00 to 50

AV Menu items 95

Page 95
Image 95
JVC LVT1627-001A Volume Adjust, 12 to +12, Subwoofer, High Pass Filter, Crossover, 55 Hz, 85 Hz, 125 Hz, Amplifier Gain