EN 65
Using an External Monitor
To attach an external monitor to your PC, use the external display cable.
Connecting an external monitor
When you connect an external monitor to your PC, it looks like an ordinary desktop PC. You can use the monitor by just connecting it with the external display cable. You can display images on the external monitor for other people and you can watch them on the LCD panel of your PC.
For switching the display between the external monitor (CRT) and LCD panel of your PC, press the Fn + F10 keys, and the mode will be switched in the following sequence:
LCD (LCD panel of PC) ¥
CRT (external monitor) ¥ LCD + CRT
Notes
• When disconnecting the external display cable, be absolutely sure to pull it straight out while
pressing the push areas at the two ends.
• No switching results when the Fn + F10 keys are pressed if the CRT (external monitor) is not connected.
• Do not disconnect the VGA cable during operation in the CRT (external
monitor) mode. The mode will not be switched by operating the Fn + F10 keys while this cable is disconnected. To enable the operation of these keys in this state, the VGA cable must be
Changing the external display's resolution
1Switch over to the external display,
2When the “Display Properties” screen has appeared, click the [Settings] tab.
3Move the [Screen resolution] bar to change the resolution.
4 Click [OK] to enter the new resolution setting.
Screen resolution bar