JVC MP-XV841US Using the SD Memory Card Slot

64 EN HARDWARE

Using the SD Memory Card Slot

Your PC has an SD memory card slot.

An SD memory card or multimedia card can be used.

When you use an SD memory card, remove the dummy card from the SD memory card slot.

1. Remove the dummy card.

2. Insert an SD memory card.

Caution: Insert the SD card in the correct direction.

Notes

•The SD memory card and MultiMedia card are optional.

•The SD memory card slot of your PC does not support the SD I/O function and data

transfer using the copyright protection functions.

•If you do not use an SD memory card on your PC, keep the dummy card inserted in the slot

to prevent dust or other foreign bodies getting into the PC.

•When formatting an SD memory card or MultiMedia card in this PC’s SD memory card

slot for use in a DVC or digital camera, first select [FAT] rather than [FAT32] on the Windows

XP format screen, and then proceed with the formatting.

*Before formatting a memory card, back up its contents on the PC’s hard disk drive, for

instance.

1 Press the dummy card slightly, and it will be ejected.

2Hold the ejected card and remove it from your PC.

Check the cut area.

(The terminal side

must face downward.)

04.5.10, 2:09 PM64

Contents

Main INSTRUCTIONS MP-XV841US * Mobile Mini Note PC SAFETY PRECAUTIONS Dear Customer, NOTES: The rating plate (serial number plate) of the AC Power Adapter is on its bottom. CAUTIONS: When using the wireless LAN WARNING Radio waves emitted from wireless LANs WARNING Battery Packs Recharging time is based on room temperature of 20C (68F). The lower the temperature, the longer recharging takes. LCD Screen Main Unit How To Handle CD-ROMs Page CHECKING INVENTORY JVC Software License Agreement END-USER LICENSE AGREEMENT Page END-USER LICENSE AGREEMENT Page Table of Contents PARTS AND COMPONENT NAMES Your Mobile PC has the following parts and components. Page Page 2. Open the display panel SETTING UP 1. Mounting/Dismounting the Lithium-Ion Battery Pack 3. Recharge the battery pack by plugging the AC cord into DC Input connector 4. Make sure that the battery pack is fully recharged TURN-ON Turning (On/Off) Key On Initial Setup of Microsoft Windows 6. Enter the user name and click [Next]. 7. Click [Finish]. Turn-Off Page JVC ORIGINAL SOFTWARE Setup of JVC Original Software Page CC Converter To make the effect valid or invalid or to change the effect level: EN 27 The following menu options are effective only when you have checked the Enable option. PD-TS decoder Easy Network Changer Page EN 31 STANDARD APPLICATION Page To Set Up the Standard Applications Again To Uninstall a Standard Application Page Page 36 TO CONNECT TO THE INTERNET Contracting with the Internet Service Provider Connection of Telephone Line and Modem Setup 3. Setting up the modem The Internet Connection Setup Page Page Page Page Connecting to the Internet 1. Click [start] and click [Internet] at the upper left part of the Menu. 2. Click [Connect]. Page Accessing a Web Page E-MAILING Setting Up E-Mail Software Page Page Sending and Receiving E-mails Page Page Page Using the Pointing Device Page Using Keyboard Using Hot keys Using the Numeric Keypad If a Key Top Has Come Off 58 Using the center keys K KEY LOC SURROUND Using the DVD/CD function keys 8 4 9 2 6 Page Page Using the DVD-ROM & CD-R/RW drive Types of discs supported Inserting the discs Removing Using the SD Memory Card Slot 1. Remove the dummy card. 2. Insert an SD memory card. Using an External Monitor Connecting to a Network Setting for Network Connection EN 67 Page Page Network Connections Using a Wireless LAN General Description of Wireless LAN Types of Wireless LAN Networks Suggestions for Using the Wireless LAN Setup Procedure for the Wireless LAN 1. Start up the PC. 2. Set the wireless LAN to ON using the wireless LAN ON/OFF switch. 3. Set the IP address to be used by the wireless LAN. Page Page Page How to Shut Down the Wireless LAN Functions 1. Set the wireless LAN ON/OFF switch to OFF. Page Page Checking the Battery Level Power-saving Mode Page Increasing the (Optional) Memory Capacity Adding or Removing a Memory Board 5. Return the memory expansion cover, mount the battery pack, and retighten the three screws. Checking the Additional Memory Board Using the UltraPOST self-diagnosis tool Page PC RECOVERY (REPEATED PC SETUP) Setting Up Your PC Again 1. What is the Recovery? 2. Before Starting Repeated Setup 3. Repeated Setup System Recovery Procedure Page Page Q&A If the Q&A does not help you Power Q. Q. A. About the message appearing if Windows is not exited normally Page EN 95 Display Q. A. Using the Internet Q. A. EN 97 Q. A. Q. Q. A. EN 99 Wireless LAN Q. A. Q. A. Q. A. Battery Q. Q. A. EN 101 DVD-ROM & CD-R/RW drive Q. A. Q. loaded or saved. A. 102 EN 103 Q. PC. A. Q. A. 104 EN 105 Miscellaneous Q. A. Q. Q. A. Q. A. Page List of Support Centers Trademark Notice 8When the surface of the unit is dirty: 8When the disc is dirty: 8When the lens is dirty: 8If the turntable is dirty: Maintenance How to Dispose Warning 112 Specification 04.5.10, 7:22 PM112 Main unit Wireless LAN Specifications AC Power Adapter (MP-ACX2) Input Voltage AC 100 to 240 V 1.5 A 50/60Hz Output Voltage DC 19 V 2.64 A