EN 83
Continue to next page
Adding or Removing a Memory Board
If you have operated your PC, its inside may be hot and you may get a burn. Turn the power
switch off and wait for the PC to cool down.
1. Turn the PC Power switch off, and disconnect AC adapter from your PC. Then,
remove the lithium-ion battery pack (if any) and all other peripherals from your
PC.
2. Remove the lithium-ion battery pack and the memory expansion cover by taking
the following steps.
1) Turn your PC upside down, and remove screws 1 to 3.
2) Open the memory expansion cover.
3) Remove the lithium-ion battery pack in the arrow direction.
Caution
Do not loosen any other screws, otherwise, your PC may fail.
3. Discharge any static electricity from your body by touching something metallic
nearby. (Not on the PC)
4. Add or remove a memory board.
Caution
Add the 512M-byte memory board to expand the PC’s memory capacity of the MP-XV841GB
to the maximum 768M-bytes. Refer to page 84 for the procedure to mount and remove the
memory board.
1)
2) Open the memory
expansion cover.
3) Remove the battery
pack by sliding it in
this direction.
04.5.10, 2:07 PM83