84 EN HARDWARE
1) Mounting a memory board
1Check the correct mounting direction of memory board (by observing the cut area).
2Slant the memory board and insert it into its socket.
3Push the memory board until it is locked, but do not apply excessive force to it.
Caution
If it is difficult to lock the memory board, make sure that the board has been inserted securely.
Do not apply excessive force to it, or the memory board may be damaged.
2) Removing the memory board
1Open the right and left support levers of the memory board by pressing them outward.
2Pull out the memory board in the arrow direction.
5. Return the memory expansion cover, mount the battery pack, and retighten thethree screws.
Memory slot direction
Memory slot
Memory board
Position the memory board in such a
way that, when seen from above, the
cut-out is at the tip of the right
corner as shown in the figure.
Align the cut-out to the right side of
the slot and then insert it securely.
04.5.10, 2:07 PM84