JVC MP-XV841US manual Display, PC is turned on but nothing appears on the screen

Models: MP-XV841US

1 114
Download 114 pages 54.01 Kb
Page 95
Image 95

EN 95

Display

Q. The PC is turned on but nothing appears on the screen.

A. If the screen blacks out during operation, check the following.

When the (Stand By) lamp is lit.

Move the stick or press any key on the keyboard to check if the power-saving function is working.

Check whether the VGA cable has been disconnected with the external display mode still set.

While pressing Fn , press F10 . (Each time you do this, you can change between external display and LCD modes.)

Before disconnecting the VGA cable, select a mode other than CRT (externally connected), and proceed. (Page 65)

To adjust the LCD display brightness:

Pressing 7 of center keys turns the screen darker. Pressing 6 of center keys turns the screen brighter.

When the (Stand By) lamp is flashing.

The PC is in standby mode (The power-saving mode is working).

Press the On/Off key or any key on the keyboard.

Important

Pressing the (On/Off) key for more than 4 seconds terminates Windows forcibly, discarding the unsaved data.

When the (Stand By) lamp is not lit.

The PC is turned off. Press the (On/Off) key to turn on your PC.

Page 95
Image 95
JVC MP-XV841US manual Display, PC is turned on but nothing appears on the screen, To adjust the LCD display brightness