Operations (Step 5 Operating Using a Web Browser)
5-4 Setting Using the Web Browser (3. Alarm Setting)
Alarm Setting window:
This page describes procedures for setting
1
2
3
Click 
to apply settings and to save the set values.
Click 
to apply settings without saving the set values. These settings will be cleared upon turning off the power of
Alarm In
For specifying the camera operation upon input of alarm signals.
1IN1/IN2
On : Detect Mode
(Set value: Make, Break, Toggle)
: Alarm Out
(Set value: Not Available, OUT1, OUT2)
:Message Packet
(Set value: Available, Not Available)
:FTP
(Set value: Available, Not Available)
:Shutdown
(Set value: Available, Not Available)
Off : Do not use Alarm 1 and Alarm 2.
2 Relay Alarm
On : Alarm Out
(Set value: Not Available, OUT1, OUT2)
:Message Packet
(Set value: Available, Not Available)
:FTP
(Set value: Available, Not Available)
:Shutdown
(Set value: Available, Not Available)
Off : Do not use Relay Alarm.
Alarm Out
For performing setting related to output during an alarm activation.
3OUT1/OUT2
On : Output Value
(Set value: ON, OFF)
:Pattern
(Set value: Level, Momentum)
:Momentum Interval
(Set value: 1 to 5000 milliseconds)
Off : Do not output alarm.
Notes
●Set output settings according to settings of the device for which alarm output is sent to.
●When alarm setting is complete, always check to ensure that the alarm is functioning correctly.
80 |
|
|
| 81 |
