Operations (Step 5 Operating Using a Web Browser)
5-7 Image Link
Output images of
Images (still and motion) captured using
Displaying a still image:
Still images can be displayed by creating a web page containing the following:
<IMG SRC="http://******/still.jpg">
(Enter URL of
Displaying a motion image:
Motion images can be displayed by creating a web page containing the following:
<APPLET CODE="mjpeg.class" WIDTH=640 HEIGHT=480 CodeBase="http://******/"></APPLET> (Enter URL of
Displaying still images uploaded to the /user folder:
Still images in the /user folder can be displayed by creating a web page containing the following:
<IMG SRC ="/user/xxxxx">
(xxxxx refers to the file name of the still image)
Notes
●Both still and motion images are displayed according to the preset image size and compression level values.
If Java is disabled in the web browser, images may not be displayed properly.
●If a password has been set, password authentication will be necessary before display of motion images using Java is made possible. (This is an Internet Explorer restriction.)
●Ensure that the "WIDTH" and "HEIGHT" values are identical to the image size set in
Others
Troubleshooting
Symptom | Causes/Remedial Actions |
|
|
Forgotten the | ● Use the "Search" function in the |
address that was changed using | to view the list of IP addresses for cameras connected to |
the | the network. (☞ Page 32) |
|
|
Unable to record. | ● Has the folder for saving images been deleted? |
| Check to ensure that the folder exists. (☞ Page 65) |
| ● Is the hard disk of your PC full? |
| Check the available hard disk space on your PC and delete |
| unwanted files. |
|
|
A long time is required to cancel | ● Once the connection is activated, it cannot be canceled |
an action when the "Connecting | within a few seconds. |
..." message is displayed. |
|
|
|
Color is unsatisfactory. | ● Check the color adjustments of the monitor and video card. |
| ● Is the color setting of your PC screen set to High Color |
| (16 bits) or lower? |
| If this is so, change it to True Color (24 bits) or higher. It |
| will be difficult to achieve display of natural color tones |
| using a setting that is lower than this. |
| ● Adjust the White Balance. |
| Adjust White Balance manually by switching the White |
| Balance Automatic/Manual switch to MANU. |
| (☞ Page 11) |
| ● When shooting scenes with different light sources (e.g. |
| when alternately shooting outdoor scenes under the |
| sunlight and indoor scenes under a fluorescent light), Auto |
| White Balance may take some time to function. Hue may |
| differ slightly according to different objects, but this is not |
| a malfunction. |
|
|
Image size and quality changes | ● When a |
automatically. | will be given to the PC for which |
| is last performed. |
|
|
Connection to | ● When the network is loaded with frequent broadcasting |
be established or gets cut off. | or collisions, connection may not be established or may |
| be cut off when errors occur with the network. |
| Check the network status. |
|
|
Unable to perfor m camera | ● About 60 seconds are required for initialization of the |
control or settings acquired are | camera to complete upon turning on the power. |
incorrect for a span of about 60 | To perform camera control or acquire settings, do so by |
seconds after turning on the | allowing an interval of at least 60 seconds after turning on |
power. | the power. |
|
|
86 |
|
|
| 87 |
