Settings and operation of Built-in Viewer

MPEG4 Viewer (continued)

MPEG4 Viewer Configuration (continued)
A Title Bar Display

For setting display items on the viewer screen.

 

 

Settings

For the MPEG4 Viewer, characters are displayed in the title bar of the

 

 

 

window.

 

 

 

 

 

 

Camera ID

Select AOnB to display [Camera ID]. (Up to 16 alphanumeric characters

 

 

 

will be displayed.)

 

 

 

[Camera ID] can be specified on the [Camera] page of VN-V686WPU.

 

 

 

(A Page 38)

 

 

 

 

 

 

PositionTitle

Select AOnB to display the title of the position that is being displayed.

 

 

 

 

 

 

Tracking Status

Select AOnB to display the Intelligent Tracking status as AStandbyB,

 

 

 

ALockedB or ALosingB on the title bar. (A Page 111)

 

 

 

 

 

 

Time

Select AOnB to display the time.

 

 

 

 

 

 

Format

Select the format for displaying time.

 

 

 

YYYY, MM, and DD denote year, month and day respectively, while HH,

 

 

 

MM, and SS denote hour, minute and second respectively. mm is

 

 

 

equivalent to 1/100 seconds.

 

 

 

 

 

B Stream Settings

For specifying settings for receiving MPEG4 stream.

 

 

 

 

 

 

Stream

For selecting the protocol when the viewer acquires data from VN-

 

 

 

V686WPU.

 

 

 

When AHTTPB is selected, lost packets are recovered via resending. VN-

 

 

 

V686WPU may be monitored using multiple viewers when AMulticastB is

 

 

 

selected.

 

 

 

Memo:

 

 

 

 

 

 

 

 

 

● When playing back via multicast, start multicast sending on the

 

 

 

 

Streaming page of the VN-V686WPU unit.

 

 

 

 

[Streaming Page] (A Page 70)

 

 

 

 

Note：

 

 

 

 

 

 

 

 

 

● When Built-in Viewer is launched with AMulticastB specified, a Windows

 

 

 

 

firewall warning may appear. In this case, select AunblockB and proceed.

 

 

 

 

● If AblockB is selected, the Windows firewall will block the multicast stream

 

 

 

 

and playback of multicast by the viewer will fail.

 

 

 

 

 

 

 

 

 

 

 

HTTP Port

You can change the HTTP port number.

 

 

 

The default port number setting is 80.

 

 

 

Specify the same value as the parameter that is set on the Protocol page

 

 

 

of VN-V686WPU. (A Page 69)

 

 

 

 

 

 

Multicast IP

You can change the multicast IP address.

 

 

Address

The default address is 225.0.2.1.

 

 

 

 

 

 

 

 

102