●Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

●We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VTR, hard disk recorder or video tape.

●The Automatic Tracking function, Intelligent Tracking function and Motion Detection function are simple functions and cannot be used as a substitute for a security alarm. JVC shall not be liable for any inconveniences or damages caused in the event of error detection or when these functions cannot be detected. We shall not be liable for any inconveniences or damages caused as a result of operational failure for alarm input/ output.

How to Read this ManualSymbols used in this manual

Note : Describes precautions concerning the operation of this product.

Memo : Describes reference information, such as functions and usage restrictions of this product.

A : Indicates the reference page numbers and reference items.

Contents of this manual

●JVC holds the copyright to this manual. Any part or all of this manual may not be reproduced without prior consent from the company.

●Windows is a registered trademark of Microsoft Corporation in the U.S.

●Product names of other companies described in this manual are trademarks or registered trademarks of the respective companies. Marks such as ,  and  have been omitted in this manual.

●Design, specifications and other contents described in this manual are subject to change for improvements without prior notice.

Safety precautions

Mounting to a firm place

As the unit rotates at high speed, mount it on a firm place with sufficient strength to support the vibration and weight of the unit (approx. 5.5 kg).

If the strength is weak, the vibration will cause fuzzy images on the monitor screen. In the worst scenario, the camera may even fall off and hit somebody, resulting in serious accidents.

Mounting the camera correctly with the designated clamping brackets

Always use the designated clamping brackets. Be sure to connect the fall prevention wire and tighten the fixing screws or nuts securely.

Using the correct power and voltage

The rated power of this product is AC 24 V, 50 Hz/60 Hz. Supplying a power beyond the rated value may result in failures and in the worst scenario, smoking and fire.

This unit is able to divert lightening conduction to itself and the connecting cables to a certain extent but this is not 100 % guaranteed. For installation locations that are likely to suffer lightening strikes, be sure to take appropriate measures such as adding arrestor to the connecting cables.

Consult your dealer as special technique is required when installing this product. Ensure that the fixing screws or nuts are tightened securely, otherwise, the unit may fall off.

Inspect the unit regularly.

Screws may be loosened due to vibration or deterioration of the mounting section. Perform regular inspections for loosened screws and check whether there is any danger of the unit falling off.

Do not hang on this product, shake it, or hand objects over it. Applying an excessive load may cause the product to fall off and result in accidents.

Do not modify this product. It may result in accidents.

7