JVC VN-V686WPU Level, Limit, Tracking, Tracking, Intelligent, (continued), Restart Time, Auto Tracking, C Intelligent, Tracking Zoom, Tracking Zoom, BAuto Tracking

Setting Using Internet Explorer

Setting (continued)

PTZ Page (continued)

BAuto Tracking/			Note：
	Intelligent
			● The Auto Tracking function of this camera detects changes in brightness. As
	Tracking
			such, depending on changes in the illumination, it may or may not detect
	(continued)
			movement of objects having the same color as the background color. It may be
			difficult to detect objects with very slow movement. Check the operating
			conditions thoroughly beforehand and configure the settings such that there will
			not be any misoperation or omission of detection.
			● This function starts from home position and initial detect area is the screen of
			the home position without enlargement by [Stabilizer] (A Page 40). When
			[Stabilizer] is set to AOnB, as the screen is enlarged, it will also respond to
			motion of image which is not shown on the screen. This is the specification of
			this unit, not a malfunction.
	Restart Time	Auto Tracking:
			This item sets the duration to return to the home position when there is no
			movement in the images after auto tracking starts.
		Intelligent Tracking:
			When Intelligent Tracking loses the object, you can return to the home
			position after the preset [Restart Time] has elapsed. For Intelligent Tracking,
			the camera does not return to home position while the object is locked even
			if the object does not move.
		[Setting values : Off, 10seconds, 20seconds, 30seconds, 40seconds,
				50seconds, 60seconds, 120seconds]
			Note：
			● When the [Mode] item of [Auto Return]A is set to AAuto TrackingB and the
			[Return Time] is set shorter than the [Restart Time] for [Auto Tracking]B, the
			camera will operate according to the [Return Time].
	Auto Tracking	This item sets the detection sensitivity of Auto Tracking/Intelligent Tracking.
	Level	To lower the sensitivity B Decrease the number
		To increase the sensitivity B Increase the number
		[Setting range : 0 to 10]
C Intelligent		This item sets the zoom for [Intelligent Tracking].
	Tracking
	Tracking Zoom	When this item is set to AOnB, the zoom ratio changes according to the
		movement of the object.
	Tracking Zoom	When [Tracking Zoom] is set to AOnB, this item sets the threshold limit of the
	Limit	zoom ratio. When Intelligent Tracking is started, tracking is possible if the zoom
		ratio is within 20x, even if the current zoom ratio has exceeded the [Tracking
		Zoom Limit]. In that case, behaviour of automatic zoom changes according to
		the [Tracking Zoom] setting as followings.
			● [Tracking Zoom] is AOnB:
				Tracking starts at the current zoom ratio. If the [Tracking Zoom Limit] is
				exceeded, the camera moves in the WIDE direction but not in the TELE
				direction. Once the zoom ratio enters the [Tracking Zoom Limit], the
				camera will zoom within the configured tracking zoom limit.
			● [Tracking Zoom] is AOffB:
				The camera tracks objects at the current zoom ratio. The zoom ratio will
				not change.

56