JVC VN-V686WPU Port, Protocol Page, A HTTP Server, B VSIP Protocol, C VSIP Server Port

Protocol Page

This page is for changing the HTTP server port number, VSIP server status, and VSIP server port number.

This page can be used during access using AadminB.

●Press the [OK] button to enable the new settings.

●After changing, you will need to re-establish the connection if you are using the Internet Explorer.

A

B

C

A HTTP Server	You can change the port number for Built-in web server of VN-V686WPU. (1-
Port	65535)
	The default port number setting is A80B. The port number of JPEG/MPEG4
	server is changed also.
	To access to VN-V686WPU from the Internet Explorer, enter the following in
	the Internet Explorer when the camera is in its default settings.
	http://192.168.0.2
	If the port number is changed to A8080B, for example, enter the Internet
	Explorer as follows.
	http://192.168.0.2:8080
B VSIP Protocol	You can change the On/Off setting of VSIP Protocol. To use this unit from
	Nextiva of Verint Systems Inc., select AOnB.
C VSIP Server Port	You can change the port number for Built-in VSIP server of VN-V686WPU.
	(1-65535)
	The default port number setting is A5510B.
Memo:

●If Built-in Viewer is used for playback, change the [HTTP Port] number in the setting screen of Built-in Viewer to the same value. (A Page 97)(A Page 102)

69