Setting Using Internet Explorer

Setting (continued)

Details Page

This page is for performing detailed network setting.

This page can be used during access using AadminB.

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

A

B

C

D

E

F

A JPEG

For setting the TOS value of IP packets in which JPEG is stored.

TOS(DS field)

The upper six bits out of the eight bits that make up the TOS value belong to

DSCP.

 

 

This upper six bits can be set. The lower two bits are A0B. For example, upon

 

setting to A255B, the lower two bits are converted to A0B, and the value

 

becomes A252B.

 

TOS values are used in networks that support QoS. By setting QoS for the

 

network switch, routing can be done by giving priority to packets with a larger

 

TOS value.

 

 

B MPEG4

For setting the TOS value of IP packets in which MPEG4 is stored.

TOS(DS field)

For details, refer to the [JPEG TOS(DS field)] item A above.

 

 

C TTL (Unicast)

For setting the TTL value of JPEG/MPEG4 packets that are to be sent via

 

TCP.

 

 

D TTL (Multicast)

For setting the TTL value of JPEG/MPEG4 packets that are to be sent via

 

multicast.

 

 

E MTU

For setting the maximum packet size for storing JPEG/MPEG4.

 

[Setting range : 1280 to 1500]

 

 

F Negotiation

For setting the negotiation of the network.

 

When a value other than AAutoB is selected, do not set the network device to

 

be connected to AAutoB. Ensure that it is set to the same value as VN-

 

V686WPU.

 

 

68