JVC VN-V686WPU E OK, Memo:, D Cancel, Multicast Port, C Operator Password, B Stream Settings (continued), Searching and deleting cookie files

B Stream Settings (continued)

	Multicast Port	You can change the multicast port number.
		The default port number setting is 59152.
		Memo:
			● This is enabled when AStartB is selected for the [JPEG Control] item on
			the [Streaming] page.
			● Specify the same value as the parameter that is set on the [Streaming]
			page of VN-V686WPU. (A Page 71)
C Operator Password		Operator password is required to control VN-V686WPU and to get preset
		position title from VN-V686WPU. To use PTZ Controller or to display
		preset position title, enter operator password.
			[Enter user name and password] (A Page 34)
		When the operator password has been entered under other settings, it
		will be displayed as ●●●●●●.
D Cancel		Cancels the changed settings and closes the setting screen.
E OK		Saves the changed settings.
		Click the [OK] button to enable the new settings and restart Built-in
		viewer after closing the setting window.

Memo:

●To use Built-in MPEG4 Viewer of VN-V686WPU, install “ffdshow” that is open source codec. You can download “ffdshow” from the Internet.

●The settings of Built-in Viewer are stored in the file named Cookie.

This setting screen is used to set Built-in Viewer as a software on the computer, and does not apply to settings of the VN-V686WPU unit.

When settings are changed, press the [OK] button to exit and restart the viewer.

Searching and deleting cookie files

●Open [Tool]-[Internet Options]-[Advanced] of the Internet Explorer, and press the [Settings] button under

[Temporary Internet Files]. A new [Settings] will appear. Press the [View Files] button in this window. The [Temporary Internet Files] window opens up and a list of files will be displayed. The file named Acgi-binBin this list is the Cookie for Built-in Viewer.

●Deleting this file deletes the view settings, and the viewer will be initialized during the next startup.

103