Others

Do not subject the lens to strong light source such as sun rays. This may cause the equipment to malfunction.

This camera comes with a built-in AGC circuit. The sensitivity increases automatically at a dark place and the screen may appear grainy. This is not a malfunction.

While AGC is activated, if a transceiver which causes strong electromagnetic wave is used near the camera, the picture may suffer from beat. Please use the camera more than three meters away from such transceivers.

When automatic iris is selected, the Iris Control button may not work depending on the brightness of the screen (when the amount of light is not sufficient). In this case, set the iris to Manual.

When automatic iris is selected and AGC is ON, even if the iris setting can be changed with the Iris Control button, the Sense Up function will be enabled and the brightness of the screen may not change. In this case, set AGC to OFF or set the iris to Manual.

When this camera is used in the White Balance AATW-NarrowB, AATW-WideB(automatic adjustment) mode, the color tone may differ slightly from the actual color due to the principle of the automatic tracking white balance circuit. This is not a malfunction.

If a high luminance object (such as a lamp) is shot, a white smear may appear at the upper and lower ends of this object on the screen. This phenomenon (smear) is characteristic of solid- state image sensors and is not a malfunction.

Do not touch the dome cover with your hands. Dirty covers will cause image deterioration.

Do not subject the dome cover to strong impact. It may result in damage and water seepage.

The dome cover may fog due to the drastic change of temperature when humidity is high.

Do not connect an AC 24 V cable to AC110 V/AC 230 V power supply. The camera internal circuit will be damaged. Do not use the camera. Bring it to your nearest JVC dealer for repair (charged separately).

To supply AC 24 V, use a AC 24 V supplying power unit that is insulated from AC 110 V /AC 230 V line.

When using multicast, make use of a IGMPv2- compliant network switch.

Some hubs/switches of products that are equipped with intelligent features may include a broadcast/ multicast suppression function. Viewing of multicast images on this product may fail if this function is enabled.

The electronic shutter of this product is set to 1/60 by default. For regions with a commercial power

supply frequency of 50 Hz, switch to the 1/100 during use under fluorescent lights (excluding inverter lighting equipment) to prevent flickers.

When the B&W mode is set to AAutoB, the image turns black-and-white in a dark location. As the sensitivity level is increased in this case, the screen may appear grainy and more white spots may appear. When switching between color and black-and-white images, the brighter area on the screen is emphasized, which may reduce the visibility. However, this is not a malfunction.

If the power supply voltage is momentarily cut off or reduced due to lightning or turning on of the air conditioner’s power, the image may be disrupted or noise interference may occur.

As the dome cover is of a semiglobular shape, image distortion will occur at the hemispherical edge. When the hemispherical edge of this unit is masked and horizontal level is shot in a tilt direction, the hemispherical edge will enter the field angle. This may cause the upper edge of the screen to become black and the focus unclear. In this case, you can avoid shooting the above area by using the tilt limit settings (A Page 58).

When shooting objects with a luminance difference or near a light source, ghost may occur on the screen. This is a feature of the dome cover and the built-in lens, and is not a malfunction.

In particular, manual and auto pan operation near the TELE edge (telephoto side) may cause the screen to vibrate (unsmooth rotation). This is a feature of the motor and is not a malfunction.

Long magnification zoom lens embedded into this

product. Although the focus might be slightly unclear depending on the drastic change of temperature, it will not be a malfunction.

When you preset focus, we ask you to adjust

under actual usage temperature. If you feel unclear focus, please re-preset focus.

Additionally, we recommend you to use either One

Push AF or Manual focus adjustment when you feel unclear focus at your temperature

environment.

Disclaimer

The Automatic Tracking, Intelligent Tracking and Motion Detection features do not prevent theft or fire. Our company shall not be liable for any inconveniences or failures that occur.

We shall not be responsible for any inconveniences or disturbances caused in the event of privacy invasion as a result of camera footages of this product.

9