JVC VN-V686WPU Memo:, Target, Function, Patrol Mode, B Auto Function, C Preset Position, E.g.) To select Position Number, E.g.) To select Position Number

B Auto Function

Function For selecting the operation.

Click [Start] to start the selected Auto function. Click [Stop] to stop the running Auto function.

A list of patrol modes appears when AAuto PatrolB is selected. A list of targets appears when AIntelligent TrackingB is selected.

Auto Pan	: The configured Auto Pan operation is performed.
	(A Page 113)
Auto Patrol	: The configured Auto Patrol operation is executed. Select
	[Patrol Mode]. (A Page 60)
Auto Trace	: The configured Auto Trace operation is performed.
	(A Page 115)

Auto Tracking : Auto Tracking is performed. (A Page 55)

During Auto Tracking, Motion Detection deos not work. (A Page 64)

Intelligent Tracking

: Intelligent Tracking is performed. (A Page 111)

		Note：
		● When the [Mode] item of [Auto Return] is set to AAuto PatrolB and Auto
		Patrol starts in this screen, the AAuto PatrolB mode of [Auto Return] will
		be changed to the mode that was started at this screen.
		[Auto Return] (A Page 54)
		● When Auto Pan starts, the camera will repeat the left rotate, right rotate or
		return operations. When Auto Patrol starts, the camera will complete a
		series of operations and return to the start position, and then repeat the
		entire process. When Auto Trace starts, the camera will perform a series
		of operations before returning to the start position. It will resume after 30
		seconds. If Auto Return function is set, Auto function that was started
		manually is stopped when Auto Return starts.
	Patrol Mode	For selecting the mode of the [Auto Patrol] function.
		This feature can only be configured when [Function] is set to AAuto PatrolB.
	Target	For setting the target of the AIntelligent TrackingB operation.
		Indoor	:This setting is suitable for indoor targets.
		Outdoor1(cloudy):This setting is suitable for outdoor targets when the
			contrast is not too strong, such as on a cloudy day.
		Outdoor2(sunny) :This setting is suitable for outdoor targets when the
			contrast is strong, such as on a sunny day.
C Preset Position		For selecting the preset position.
		When the selected position has been registered, the camera will move to the
		selected position. (A Page 112)
		Use the upper button to set positions in the tens and use the lower button to
		set positions in the ones.
		E.g.) To select Position Number 35
		Click upper [31-40] and click lower [5]
		E.g.) To select Position Number 50
		Click upper [41-50] and click lower [10]

Memo:

●When the upper [91-99] is selected, the lower [10] cannot be selected.

107