A On Screen Display

For setting display items on the viewer screen.

 

 

Settings

For the JPEG Viewer, characters are displayed as overlay on the video

 

 

 

image.

 

 

 

 

 

 

Camera ID

Select AOnB to display [Camera ID]. (Up to 16 alphanumeric characters

 

 

 

will be displayed.)

 

 

 

[Camera ID] can be specified on the Camera page of VN-V686WPU.

 

 

 

(A Page 38)

 

 

 

 

 

 

PositionTitle

Select AOnB to display the title of the position that is being displayed.

 

 

 

 

 

 

Motion Detection

Selecting AOnB displays the area in which motion is detected in red.

 

 

 

 

 

 

Tracking Frame

Select AOnB to display blue frame around the tracking target of Intelligent

 

 

 

Tracking on the screen. (A Page 111)

 

 

 

 

 

 

Tracking Status

Select AOnB to display the Intelligent Tracking status as AStandbyB,

 

 

 

ALockedB or ALosingB on the screen. (A Page 111)

 

 

 

 

 

 

Time

Select AOnB to display the time.

 

 

 

This indicates the time that is stored in the JPEG data.

 

 

 

 

 

 

Format

Select the format for displaying time.

 

 

 

YYYY, MM, and DD denote year, month and day respectively, while HH,

 

 

 

MM, and SS denote hour, minute and second respectively. mm is

 

 

 

equivalent to 1/100 seconds.

 

 

 

 

 

B Stream Settings

For specifying settings for receiving JPEG stream.

 

 

 

 

 

 

Stream

For selecting the protocol when the viewer acquires data from VN-

 

 

 

V686WPU.

 

 

 

When AHTTPB is selected, lost packets are recovered via resending. VN-

 

 

 

V686WPU may be monitored using multiple viewers when AMulticastB is

 

 

 

selected.

 

 

 

Memo:

 

 

 

 

 

 

 

 

● When playing back via multicast, start multicast sending on the

 

 

 

Streaming page of the VN-V686WPU unit.

 

 

 

[Streaming Page] (A Page 70)

 

 

 

Note：

 

 

 

 

 

 

 

 

● When Built-in Viewer is launched with AMulticastB specified, a Windows

 

 

 

firewall warning may appear. In this case, select AunblockB and proceed.

 

 

 

● If AblockB is selected, the Windows firewall will block the multicast stream

 

 

 

and playback of multicast by the viewer will fail.

 

 

 

 

 

 

 

 

 

 

HTTP Port

You can change the HTTP port number.

 

 

 

The default port number setting is A80B.

 

 

 

Specify the same value as the parameter that is set on the Protocol page

 

 

 

of VN-V686WPU. (A Page 69)

 

 

 

 

 

 

Frame Rate

For selecting the acquisition frame rate of the viewer.

 

 

 

Selecting a large frame rate will increase the processing load of the

 

 

 

computer on which the viewer is running.

 

Note：

●Set to a rate such that the CPU burden of the computer does not exceed 80 %. When the CPU is overloaded, the computer may not function properly.

97