For Customer Use:
              Getting Started
Information for Users on Disposal of Old Equipment [European Union]                
Attention:
(Business users)                
[Other Countries outside the European Union]
              INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR CANADA)
              IMPORTANT SAFEGUARDS
              Connection/Installation
Network Settings                
Setting Using Internet Explorer
Settings and operation of Built-inViewer                
Others
              Waterproof and weather-resistantchassis
Realizing a High Picture Quality                
Long Magnification Zoom Lens
Equipped with high precision high speed rotation platform                
Dual Stream Full Frame Rate Transmission
              How to Read this Manual
Symbols used in this manual                
Note
Memo                
Contents of this manual
              Recommended Computer
Specifications                
LAN Environment
Maintenance and operating environment                
Saving Energy
              Others
Disclaimer              
Transporting the unit
Transportation                
Copyright Protection
Maintenance              
Consumable parts
Auto Focus                
Zoom Operation
Preset Positions              
Camera
Front side                
A Camera securing hole (4 locations)
B Cable connecting hole, cap                
C Fall Prevention Wire
              Inner structure of camera
I Heater ON/OFF Switch                
JLens
K Front Mask                
L [MAC address] indication
              Surveillance Using Built-inViewer
Monitoring via Multicast                
Surveillance via Dual Stream
Saving JPEG images to the FTP server at regular intervals              
Alarm
Restrictions on Clients                
Control via customized application software
Step 1 Connection/Installation (A Page 16)                
Setting Up the Wall (A Page 16)
              Setting Up the Wall
1 Make holes in the wall                
2 Install the anchor bolts for mounting the camera
3 Install the anchor bolt for mounting the fall prevention wire                
4 Pull the cables from the hole in the wall
              2 Remove the cushioning material, lens cap and tape used during transporting
3 Mount the dome cover to the camera                
4 Remove the cable connection cap
5 Pull out the cables from the cable connection hole              
Mounting the Camera
1 Mounting the fall prevention wire                
2 Pull out the cables (from the wall) from the cable connection hole
3 Mount the camera to the wall                
Cable Connection
              3 Connecting the alarm cable (A Page 22)
4 Mount the cap                
6 Remove the dome cover protective sheet
              Connecting the power cable
connection                
distance
Conductor                
Diameter
            Page
              Cable to use
              Alarm input signal
Alarm output signal                
Rating:
              Estimation of Total Bit Rate
Bit Rate of JPEG Stream                
Picture Quality
VGA File                
QVGA File
              When distributing only MPEG4 data
Preset bit                
Total maximum
bit rate                
Total bit rate
              Setting the IP address for VN-V686WPU
(A)Assigning an IP address to VN-V686WPUfrom the DHCP server                
(A)
(B)Assigning a static IP address to VN- V686WPU                
(A) Assigning an IP address from the DHCP server
              IP address setting at the computer
1 Click [Start]                
3 Select [Internet Protocol(TCP/IP)] and click [Properties]
4 Set the IP address                
5 Click [OK] on the [Local Area Connection Propertise] screen
              Changing the IP address using the Internet Explorer
1 Launch the Internet Explorer on the computer              
4 Launch the Internet Explorer
5 Enter the user name and password (login as administrator)              
Changing the IP address using the Internet Explorer (continued)
6The top page of VN-V686WPUappears                
7 The [Basic] page with the IP address settings appears
              When the IP address of VN-V686WPUis known
When the IP address of VN-V686WPUis unknown              
Internet Explorer Setup
              If ActiveX controls and
4Disable pop-upblock                
When
              Enter user name and password
User                
Default
Description                
Name
              ●user
              View Page
              Reload Still
Image                
B JPEG
Viewer                
MPEG4
              Camera Page
A Camera ID                
B Monitor Type
[Setting values : Custom, LCD1, LCD2, CRT]              
C Black Level
[Setting range : 0 to 2]                
D Gamma
[Setting values : 0, 1, 2, Active]                
Active Gamma
              Camera Page (continued)
H Stabilizer              
I Stabilizer Level
[Setting values : Low,Mid,High]                
J Noise Reduction
K ALC                
[Setting values : Motion,Quality]
            Page
              L Shutter Speed
[Setting values : 1/60,1/100,1/250,1/500,1/1000,1/2000,1/4000,1/10000]                
M B/W Mode
To ensure a successful B&W/Color switching                
IR Preset AF
              Encoding Page
A Frame Size              
JPEG
B Quality/Size                
[Quality settings : AFS, VFS1 to VFS7 ]
C Bitrate                
[Setting range : 64kbps to 8000kbps]
              Alarm Page
A B C D              
A Action
              Alarm Page (continued)
B 1st Trigger                
Input
BlackWhite → Color, Color → BlackWhite]              
C Max. Interval
[Setting range : 1sec to 3600sec]                
D 2nd Trigger
[Setting values :Off, Input 1 Make, Input 2 Make, Input 1 Break                
Input 2 Break]
              Alarm Environment Page
              A Mail
What is FQDN (Fully Qualified Domain Name)                
B FTP
            Page
              B FTP (continued)
10 fps, 15 fps, 30 fps]                
[Setting values : 0sec to 60sec]
C Alarm Output                
[Setting range : 0 / 100msec to 5000msec]
              PTZ Page
A Auto Return                
Mode
Return Time                
[Setting values :1 minute, 2minutes, 3minutes, 5minutes, 10minutes
              B Auto Tracking
Intelligent                
Tracking
              PTZ Page (continued)
BAuto Tracking                
(continued)
Restart Time                
[Setting values : Off, 10seconds, 20seconds, 30seconds, 40seconds
              D Limit
EZoom Limit                
[Setting range : Off, 1, 2, 4, 8, 16, 32]
Pan Limit                
 Basic operation of Pan Limit
              CLimit (continued)
Tilt Limit                
[Setting range : -5Degrees to 0 degree to 10 Degrees]
E Preset Position                
Speed
              F Auto Flip
[Setting values : Off, Digital Flip, Mode1, Mode2, Mode3]              
Auto Patrol Page
              A No
              Privacy Mask Page
              A Privacy Mask
B Adjustment                
A [Adjustment], [Brightness], [Password] tab
B [Mask]                
[Setting values : 0 to 7]
              Motion Detection Page
B C D E F              
A Display Screen
B Detection                
C OK/Cancel
D Level                
E Mask All
              Basic Page
              A IP Setting
B IP Address                
C Subnet Mask
D Default Gateway                
E Host Name
              Details Page
A JPEG                
TOS(DS field)
B MPEG4                
C TTL (Unicast)
              Protocol Page
A HTTP Server                
Port
B VSIP Protocol                
C VSIP Server Port
              Streaming Page
E F G              
A Control
B Destination                
C Destination Port
D Frame Rate                
E Control
              Access Restrictions Page
              A Access
Restrictions              
Time Page
A SNTP                
B NTP Server
C Access Interval                
E Time Zone
              Password Page
A Username                
B New Password
C New Password                
Again
              Maintenance Page
              A Restart
B All Settings                
C Update
D Auto Cleaning                
[Setting values : 0-23h, 0-59m]
              List of Factory Settings of Each Page
 Camera Page                
Item
Factory Settings                
 Encoding Page
              Alarm Environment Page
 PTZ Page              
List of Factory Settings of Each Page (Cont’d)
Auto Patrol Page                
Privacy Mask Page
Motion Detection Page                
 Basic Page
              Access Restrictions Page
 Time Page                
Password Page
              Miscellaneous page
Open Source                
Software V686WPU
              Operation Page
A Total Sending                
Bitrate
System Log              
Settings Page
            Page
            Page
              Position List Page
            Page
              Patrol Settings Page
            Page
            Page
            Page
              If the
              Installing Built-inViewer
1Enter the URL of Built-inViewer in the address field of Internet Explorer                
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_j.html
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_m.html                
2 Enter the user name and password
              Screen Configuration of JPEG Viewer
A DisplaySize                
B Capture
C Pause              
Exiting the JPEG Viewer (continued)
D PTZ                
E Setup
JPEG Viewer Configuration                
F E
              A On Screen Display
Settings                
Camera ID
PositionTitle                
Motion Detection
              F OK
              Exiting the JPEG Viewer
              Screen Configuration of MPEG4 Viewer
B Pause                
C PTZ
              D Setup
MPEG4 Viewer Configuration                
E D
              MPEG4 Viewer Configuration (continued)
A Title Bar Display                
Multicast IP
              E OK
              Exiting the MPEG4 Viewer
              1 Launch the Internet Explorer
Right-click                
3Right-clickon the shortcut icon on the Desktop screen and select Properties
4Enter the URL of Built-inViewer in the URL field                
5 Click the [OK] button to end
              Operation
Setting screen tab              
B Auto Function
Function                
Patrol Mode
Target                
C Preset Position
              Operation (continued)
D Zoom                
E Pan/Tilt manual
operation button                
[Home] button
              H B/W Mode
I BLC                
[Setting values : Off, Area1, Area2, Area3, Area4]
J Iris                
K White Balance
              K White Balance (continued)
R Gain                
[Setting values : 0 to 255]
B GAIN                
One Push AWC
              Intelligent Tracking (Manual Mode)
              Registering Preset Positions
              [Setting values : HOME, 0 to 99]
Auto Pan Setting              
Auto Pan Setting (continued)
[Setting values : Low, Middle, High]              
Auto Trace Setting
[State] Display              
Symptom
Causes and Countermeasures                
Reference
            Page
            Page
              Camera Head
Network section                
LAN Specifications
 Lens                
Rotation platform
               Accessories
 Dimension [Unit: mm (inch)]                
Wall mounting hole [Unit: mm (inch)]
              PTZ OUTDOOR
V686WPU-VN                
CAMERA DOME IP