JVC XL-R5020BK Basic Operations, Turning On and Off the Power, Listening with Headphones, Play

Basic Operations

IMPORTANT

When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD Changer) or CD RECORDER. If the incorrect indicator is lit, press CONTROL CD or CONTROL CDR to select the correct target source.

On the unit:		Disc eject 0 buttons		Remote control:
STANDBY/ON	and	(0 CD1, 0 CD2 or 0 CD3)
STANDBY lamp		Disc number buttons		Disc number
		(CD1, CD2, CD3)								STANDBY/ON
						CD1		CD2	CD3		STANDBY/ON
				buttons
				(CD1, CD2,			1	2		3
	XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER			CD3)			4	5		6
			Recordable				7	8		9
			ReWritable
							10	10		GROUP
						PLAY			CONTROL
MIN MAX					MODE			REPEAT	CD	CDR
							Y			M
							A
						L				E
						P					N
					IS			GROUP			U
					D
								SET
					R			GROUP
					E
					C						L
						S					E
											C
						O				N
										A
PLAY	3 for 3-CD Changer		PLAY 3 for CD Recorder				UR			C
							CE
PHONES jack
PHONES LEVEL control

Before operating the unit any further, first set the clock built in this unit (see page 37).

To turn off the unit (on standby), press STANDBY/ON again so that the STANDBY lamp lights red and current time appears on the display.

Turning On and Off the Power

To turn on the unit without playing, press STANDBY ON so that the STANDBY lamp on the unit goes off.

• Last selected disc tray is selected again.

3	CD PLAYER	1	2	3	4	5
									HIGH SPEED AUTO TRACK
2		6	7	8	9	10	DIGITAL
1		11 12 13 14 15					44.1kHz	CD CD-R	L
		16 17 18 19 20						CD-RW		40 30 20 15 10 6 3 0dB
								FINALIZED R

Ex.: When previously selected disc is CD1 on 3-CD Changer.

•A little power is always consumed even while the unit is in standby mode.

To switch off the power supply completely, unplug the AC power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs, the clock will be reset to “AM 12:00” and the timer settings will be erased. If this happens, set the clock and the timer again.

To start playback after turning on the unit, press one of the following buttons.

Disc number buttons (CD1, CD2 or CD3)

—3-CD Changer starts continuous play from the selected disc.

PLAY 3 for 3-CD Changer on the unit

—3-CD Changer starts playing the last selected disc (if a disc is loaded on the disc tray).

PLAY 3 for CD Recorder on the unit

—CD Recorder starts playing if a disc is loaded on the CD Recorder tray.

•Pressing 3-CD Changer disc eject 0 buttons (0 CD1, 0 CD2 or 0 CD3) or EJECT 0 for CD Recorder also turns on the unit and opens the corresponding disc tray, but the currently selected disc does not change, and the playback will not start.

Listening with Headphones

When this unit is not connected to a receiver (amplifier), you can listen to the sound reproduced on 3-CD Changer or CD Recorder by connecting a pair of headphones to PHONES jack on the unit.

To increase the volume level, turn PHONE LEVEL control to

the right.

To decrease the volume level, turn PHONE LEVEL control to the left.

•Be sure to turn down PHONE LEVEL fully before connecting or putting on the headphones.

9