JVC XL-R5020BK manual To modify the program, To check the programed contents

7 Start playing.

On the unit:

Press PLAY 3 for 3-CD Changer.

From the remote control:

Press 3.

The tracks are played in the order you have programed. Program Play stops when all the programed tracks are played once (unless Repeat Play is activated—see page 15).

To stop playing, press STOP 7 for 3-CD Changer on the unit or 7 on the remote control.

To exit from Program Play, before or after play, press PLAY MODE once or twice so that the unit enters another play mode (Random Play or Continuous Play).

To modify the program

You can modify the program before or after play.

To add steps, select the disc number and the track number you want to add by following steps 3 to 6 on page 12.

To erase the last step, press CANCEL twice.

•The track number of the last step is erased by pressing CANCEL once, and pressing it again erases the disc number of the last step.

To erase a particular programed track, select the program step number you want to erase by turning MULTI JOG ¢ / 4 on the unit or pressing 3 or 2 on the remote control, then press

CANCEL.

To erase all programed tracks, press CANCEL repeatedly until “PG NO PROGRAM” appears on the display.

•The program you have made is also erased: —when unpluging the AC power cord.

—when ejecting the currently selected disc tray.

•You cannot program the track numbers exceeding 99.

•If you try to program a 33rd step, “MEMORY FULL” will appear on the display.

•If you have a track number which does not exist, or if you select an empty disc tray number, such a step may be programed but skipped during the Program Play.

•MP3 disc cannot be played back even though they can be programmed. If this unit detects an MP3 disc during Program Play, the playback will stop. (“CANNOT PLAY” appears on the display.)

To check the programed contents

On the unit:

Turn MULTI JOG ¢ / 4 before starting playback.

From the remote control:

Press 3 or 2 before starting playback.

•¢ or 3 : Shows the programed tracks in the programed order.

•4 or 2 : Shows them in the reverse order.

13