Specifications | JVC XL-R5020BK specification

Specifications

Common specification

Audio input sensitivity/Impedance (at 1 kHz)

Analog input:	300 mV/50 kΩ
LINE IN (REC):	300 mV/50 kΩ
MiC IN:	3 mV/600 Ω – 10 kΩ

Digital input:

DIGITAL IN: OPTICAL

Input level: –21 dBm to –15 dBm

DIGITAL IN: COAXIAL

0.5 V(p–p)/75 Ω

(With the built-in sampling rate converter, corresponding to 32 kHz/44.1 kHz/48 kHz)

Audio output level/Impedance (at 1 kHz) Analog output:

LINE OUT (PLAY): 2 V/10 kΩ

HEADPHONE: 9.3 mW/ 32 Ω Digital output:

DIGITAL OUT: OPTICAL

Output level: –21 dBm to –15 dBm

DIGITAL OUT: COAXIAL

0.5 V(p–p)/75 Ω

CD player

System:	Compact disc digital audio system
CD Capacity:	3 CDs
Dynamic range:	96 dB
Signal-to-noise ratio:	100 dB
Frequency response:	4 Hz to 20 kHz (±0.5 dB)
Wow and flutter:	Immeasurable
Pitch control:	±12%
Total harmonic distortion:	0.005 %

CD recorder

System:	Compact disc digital audio recording system
Sampling frequency:	44.1 kHz
Dynamic range:	91 dB (during playback)
Signal-to-noise ratio:	95 dB (during playback)
Frequency response:	4 Hz to 20 kHz
Wow and flutter:	Immeasurable
Total harmonic distortion:	0.0063 %

General

Power requirement:	AC 120 V , 60 Hz
Power consumption:	37 W	(at operation)
	5 W	(on standby)
Dimensions (approx.):	435 mm ⋅ 127 mm ⋅ 334 mm
	(17–3/16inch ⋅ 5 inch ⋅ 13–3/16inch)(W/H/D)
Mass (approx.):	6.3 kg (13.9 lbs)

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

45

Image 47

JVC XL-R5020BK manual Specifications

Contents

XL-R5020BK Important for Laser Products For U.S.A Table of Contents Introduction Precautions Important notice Precautions on Disc Playback and RecordingPlayback Recording STANDBY/ON Parts IdentificationSee pages in the parentheses for details To operate CD Recorder, press Control CDR To cancel the reset, press CancelTo operate 3-CD Changer, press Control CD Getting Started Supplied AccessoriesPutting the Batteries into the Remote Control To connect an analog component Connecting Other Components Audio component with digital input To connect digital componentsAudio component with digital output Basic Operations Turning On and Off the PowerListening with Headphones To increase the volume level, turn Phone Level control to On the unit only Playing Back Discs on 3-CD ChangerLoading Discs Playing Back All Loaded Discs-Continuous Play To go to another track directly Basic Disc OperationsTo start playing a disc during playback of another disc To go to another track Programing the Playing Order of the Tracks-Program Play To modify the program To check the programed contents CD Changer Multi JOG ¢ Disc trays Play 3 Stop Play ModeRandom indicator also lights up on the display Playing at Random-Random Play Press Pitch + or − during play Adjusting the Playback Speed-Pitch ControlRepeating Tracks-Repeat Play Prohibiting Disc Ejection-Tray Lock Press Eject 0 again Playing Back a Disc on CD RecorderLoading a Disc Playing Back a Disc-Normal Play Press Eject Press Control CDR, then Load a disc onto the CD Recorder disc tray seeCDR MP3 Disc Structure Playing Back MP3 Discs on 3-CD ChangerAbout MP3 Track numbers already played go off from the display Playing Back MP3 DiscsPause Play Stop Buttons To go to another group directly Basic MP3 Disc OperationsTo go to another track within a group directly To go to another group Before You Start Recording Recording on a CD-R/CD-RW Press one of the disc number buttons CD1, CD2, CD3 you want Recording Manually-Standard RecordingPress ¶ REC/REC Muting Start recording Menu SET To adjust the analog recording levelPress SET or Menu to finish the adjustment REC Level +/− To change the display information while recording To make a silent portion while recordingTo fade in and out recording-only for analog source Finalizing discs automatically Preparing for CD Synchronized RecordingChanging the recording speed Disc Direct Recording CD REC ¶ CancelRecording from 3-CD Changer-CD Synchronized Recording To release the seamless recording, select Normal Normal initial setting appears on the displayRecording the entire disc without any interruption Multi JOG ¢ CD REC One Track RecordingCD REC ¶ Stop 7 for To program other tracks, repeat step To skip the currently playing track, press CancelTo erase all programed tracks, press Cancel in step Listening Edit Recording Program Edit Recording Press Synchro Start playback of the selected external component Pause REC Muting ¶ REC/REC Muting Recording from the Two Sources Mixed-Sound Mixing RecordingMIX Balance Selector Press Finalize again to finalize a disc Other Recording FunctionsFinalizing a disc-CD-R/CD-RW To use Synchronized Recording for recording all tracks Sync ALL initial setting appears on the displayAuto TR on initial setting appears on the display Recording track marks manually Recording skip marks onto a CD-R/CD-RW-Track Skip Separating recording tracks automaticallyTurning on or off sampling frequency rate converter Load a recorded disc on the CD Recorder disc tray Erasing tracks only for CD-RW-Track EraseErasing all tracks only for CD-RW-Disc Erase Load an unfinalized disc on the CD Recorder disc tray To set the clock first time Using the TimerSetting the Clock To adjust the clock again Unit enters off-time setting mode Using Daily Timer and Once TimerHow Timers actually work STANDBY/ON Menu SET Cancel To turn on Playing Timer or Recording Timer Setting Playing TimerSetting Recording Timer Timer Priority Automatic source selection Compu Link Remote Control SystemConnection Available functions Maintenance Glossary Message Signification Solution Symptom Possible Cause Action Troubleshooting Specifications Authorized Service Centers Limited Warranty 0502KTYMDWJEM