JVC XL-R5020BK manual Compu Link Remote Control System, Connection, Available functions

COMPU LINK Remote Control System

The COMPU LINK remote control system allows you to operate JVC’s audio components like this unit through the remote sensor on a receiver (amplifier).

Connection

To use this remote control system, you need to connect JVC’s audio components through the COMPU LINK-4 (SYNCHRO) or COMPU LINK-3 (SYNCHRO) jacks (see below) in addition to the connections using audio cables with RCA pin plugs (see page 7).

•Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.

•When using COMPU LINK remote control system for operating a receiver (amplifier) equipped with TAPE and/or CDR jacks, set the MODE selector to the appropriate position (see page 7).

	MD recorder etc.
	Cassette deck
	COMPU LINK – 4
	(SYNCHRO)
MODE
CDR	TD
	XL-R5020BK
Receiver
(amplifier)

Available functions

This remote control system allows you to use the functions listed below.

Automatic source selection

This unit will turn on (or off) automatically:

—when you turn on (or off) the receiver (amplifier), and —when you select TAPE or CDR on the receiver (amplifier).

Automatic power on/off (standby): only possible with the COMPU LINK-3 and COMPU LINK-4

•When pressing the buttons listed below, the source is changed to TAPE or CDR on the connected receiver (amplifier):

—PLAY 3 for 3-CD Changer on the unit —PLAY 3 for CD Recorder on the unit —Disc number buttons (CD1, CD2 or CD3)

—3on the remote control

•When this unit is selected (TAPE or CDR) as the source on a receiver (amplifier), the currently selected disc on this unit—3-CD Changer or CD Recorder—will start playing.

•There are four versions of COMPU LINK remote control system. This unit is equipped with the fourth version—COMPU LINK-4 which has systematic operations with the CD recorder added to the previous version—COMPU LINK-3.

•If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components.

•You cannot use the number buttons on the remote control supplied with a reciever (amplifier). Use the remote control supplied with this unit.

•You cannot use synchronized recording by using COMPU LINK remote control system.

•Refer also to the manuals supplied with your audio components.

40