JVC XL-R5020BK manual Start playback of the selected external component, Press Synchro

Recording from the External Sources—Sound Synchronized Recording

With this recording method, playback and recording start automatically when the playback sound comes into this unit through the DIGITAL IN terminals, LINE IN jacks or MIC jack.

•Recording can be also stopped automatically when the playback sound stops coming in (see page 33).

•When you purchase this unit, digital recording from MDs, CDs or DATs is set to record the entire discs or tapes. If you want to record the tracks one by one, see page 34.

IMPORTANT

When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD Changer) or CD RECORDER. If the incorrect indicator is lit, press CONTROL CD or CONTROL CDR to select the correct target source.

On the unit:	Remote control:
CD Recorder	REC
disc tray	EJECT 0 LEVEL +/−
	DISPLAY
Recordable	REC SOURCE
ReWritable

			7
Recording	STOP 7
source lamps	PLAY 3	¶ REC/	¶ REC/
	REC SOURCE
			REC MUTING
SYNCHRO		REC MUTING
	SELECTOR
		PAUSE 8

		7	8		9
		10	10		GROUP
	PLAY			CONTROL
MODE			REPEAT	CD	CDR
		Y			M
		A
	L				E
	P					N
IS			GROUP			U
D
			SET
E			GROUP
R
C						L
	S				A	C
	O
		UR	CE		N
					C

CD REC CD EDIT SYNCHRO FADE

REC FINALIZE PITCH 0

REC MUTING

PITCH

3

8

SYNCHRO

1 Load a recordable CD-R or CD-RW onto the CD Recorder disc tray.

2 Press REC SOURCE SELECTOR on the unit or REC SOURCE on the remote control to select a source to record from.

Selected recording source lamp on the unit lights up.

OPTICAL IN :Records through the DIGITAL IN/ OPTICAL terminal (digital recording). The DIGITAL lamp lights up.

COAXIAL IN :Records through the DIGITAL IN/ COAXIAL terminal (digital recording). The DIGITAL lamp lights up.

LINE IN :Records through the LINE IN (REC) jacks (analog recording). The LINE lamp lights up.

MIC IN :Records through the MIC jack (analog recording). The MIC lamp lights up.

3 Adjust the recording level if necessary—only for LINE IN and MIC IN.

See details on page 23.

5 Start playback of the selected external component.

Recording starts automatically when the sound comes in.

To stop recording for a moment, press PAUSE 8 for CD Recorder on the unit or 8 on the remote control. To resume play, press PLAY 3 for CD Recorder on the unit or 3 on the remote control. (A track mark is recorded when you resume recording.)

To stop recording, press STOP 7 for CD Recorder on the unit or 7 on the remote control.

To eject the disc, press EJECT 0. “FINALIZE ?” appears on the display.

—To finalize, press FINALIZE or SET. After finalizing, the disc is ejected.

—Not to finalize, press EJECT 0 again or wait for 5 seconds so that the disc comes out without being finalized.

To check the current track number during play, press DISPLAY on the remote control. The current track number appears for 3 seconds (see page 24).

4 Press SYNCHRO.

The unit enters recording pause mode and the SYNCHRO indicator lights up on the display. The remaining time of CD-R or CD-RW is shown on the display.

•If OPC (see page 42) is being performed, “UPDATE OPC” flashes on the display.

	Signal type							CD-R or CD-RW
	(analog or digital)							remaining time
3	1
				CD RECORDER SYNCHRO
2			DIGITAL	REC			AUTO TRACK
1			44.1kHz	CD-R	L	40 30 20 15 10 6 3 0dB
					R
		Currently recorded track numbers of CDR

•If “UNLOCK” appears on the display when selecting “OPTICAL IN” or “COAXIAL IN,” digital component connected to the DIGITAL IN terminals is not recognized. Check the connection.

•If Sound Synchronized Recording do not work correctly when “LINE IN” is selected as recording source, use the Standard Recording method (see page 22). If the sound signal is too weak for this unit to detect, Sound Synchronized Recording will not start (or will stop even while the source is being played).

31