Important Information on the Turntable before Setup
This section of the UFD 170 operating manu- al for the turntable assumes that the UFD 170 and the turntable have been properly installed and connected, as described in the installation and operating manuals.
If you have not yet done so, read the safety instructions at the beginning of this operating manual and follow them when handling the UFD 170 and the turntable.
Remote Control
All settings on the UFD 170 are made using the remote control.
Before setting up your satellite system, make sure that the location allows a free view to the satellite positions to the South and is not shadowed by trees or other obstructions. This will save you time and effort.
reception
noreception
Initial Setup Information
Refer to the “Initial Setup” section in the receiver section of this manual.
63
