Timer Settings
Do not forget the “Status” setting!
You can use the timer to ensure that a programme is recorded at the correct time with a video or DVD recorder. A total of 14 timers are provided, which you can set to different programmes or start/end times.
To access the Timer menu from the main menu, press use the keys to select “System Parameters”, then
press , use to go to “Local Time/Timer” and press again. The following display appears (example):
Use the keys to move the cursor to the desired timer and confi rm with
“Press to exit the timer.”
You can now make the following settings:
-Channel types (TV, radio or On Air Download)
-Channel number (channel name is shown automatically)
-Start time (date and time)
-Stop time (date and time)
-Timer status (no, once, daily, weekly)
You can make the settings using the keys or the number keys. Note that incorrect time settings may be rejected and leading zeroes (e.g. 07:15) must be entered when entering the time.
The current time is shown under “Start time”, which you can then change. If nothing else is entered, the end time is automatically set to the same date and one hour after the start time.
At the end, confi rm your settings by pressing or three times.
28
