Kathrein UFD 170 manual Initial Setup, Important Information, Getting Started

Initial Setup

Important Information

Before setting up the system, make sure that it has been mounted, installed and connected properly, as described in the installation manual and the safety instructions.

Getting Started

Connect the unit to the power supply. Turn on the receiver using the power switch on the front. The unit is then in standby mode.

Turn on the receiver with the  key on the remote control. Your UFD 170 welcomes you. The following OSD then appears:

The turntable then searches for the factory-preset programme. In this case, this is “Das Erste” on the ASTRA satellite. The following message then appears:

Press the  key to start the search.

16